User's Manual

8

Within a few minutes of turning on the system, the Cellular Base Station will obtain the
date and time from the cellular network and will appear in the display area. You are not
able to set the date and time manually.
To test your cellular base station:
Note: Due to timing of the test signal from the Base Station, the Mobile Device may
send an alarm to a live operator. Always have your Mobile Device nearby when
testing your system. If the operator speaks to you, please advise them that you are
testing your system. If you do not explain to the operator that you are okay and are
only testing, emergency help will be dispatched.
Step 4. User Auto Test

Press and hold the test button for 3 seconds.

After the button lights up green, the Base Station will announce “user auto-test.”
You can use the test button on your Cellular Base Station to make sure your system is
working without placing a call to the emergency response center.

MobileHelp Cellular DUO System User Guide