User's Guide


9

3 Function
3.1 Periodic Sensor Scanning
SensorsamplingandareportisperformedonceeverymonitorPeriodandreportedtotheserveronceeverycommSynchPeriod.Refertothe
referencedDataModelforfurtherdetails.NotethatthedeviceinternallytreatsroundsthemonitorPeriodandcommSynchPerioddowntothe
nearestminute.Forexample,ifeitherareconfiguredto239seconds(3minutes,59seconds),theresultantconfigurationvaluewillbesetto
180seconds(3minutes).
3.1.1 Sensors
1. Temperature:‐20deg.Cto+80deg.C(operationallimitsofthedevice)
2. Humidity:0to100%relativehumidity
3. Accelerometerg‐force,x,y,zaxes:‐16.0000to+16.0000g‐force
4. TiltAnglex,y,z:0to90degreesoftiltrelativetothevertical
5. Light:0.01to64klux.
6. Pressure:260to1260hPa.
7. TemperatureProbe(onewiretemperature):‐20deg.Cto+80deg.C(operationallimitsofthedevice)
3.1.2 GNSS/GPSLocationandWIFIScanning
GNSS/GPSisscannedwitheachsensorreporttogetthedevice’slocation.IfaGNSS/GPSfixcannotbeachieved,WIFIisscannedforaccesspoint
dataforusewithWIFILAAS.
3.1.2.1 GPS/GNSSData
Latitude,Longitude,Speed(m/s),Bearing(deg),Altitude(m),Accuracy(m)
3.1.3 CoarseLocationData
Connectedcelltowerandneighboringcelltowerdataareincludedwitheverysensorreport.
CellId,MNC,MCC,LAC,TAC,OperatorID,SignalStrength,RAT,NeighborCelltowerData
3.1.4 DataReportFormat
Refertothedatamodelforfurtherdetails.