User's Manual
Maintaining Your Phone 225
RESET YOUR DEVICE
Occasionally, you may need to reset your device. A normal (or Soft reset) of your
device clears all active program memory and shuts down all active programs. This
can be useful when the device is running slower than normal or a program is not
performing properly. A soft reset is also necessary after the installation of some
programs. If a soft reset is performed when programs are running, unsaved work
will be lost.
You can also perform a Hard Reset (also known as a “Clean Boot”). Master Clean
should be performed only if a normal reset does not solve a system problem.
After a Hard Reset, the device is restored to its default settings (the way it was
when you rst purchased it and turned it on). Any programs you installed, data
you entered and settings you customised on the device will be lost; only Windows
Mobile software and other pre-installed programs will remain.
Normal (Soft) Reset
Using the stylus, press the recessed RESET button which is located to the right
of the keypad. Alternatively, remove the battery for a minute and then replace it.
Hard Reset (Clean Boot)
Hard reset by accessing the Master Clear Application:
Tap Start > Settings > System tab then select Master Clear.1.
Enter conrmation code and tap Yes to conrm.2.
Warning: Master Clear will restore your unit to its default factory settings. All user data
and programs on the device will be deleted.