User's Manual
114 i-mate | User Manual
Set up an MMS account
In order to send a message, you need a valid connection and a default
server (consisting of a WAP gateway and an MMSC server). Users will
usually not be required to enter the MMS network settings. These settings
can be automatically congured and WAP provisioning is supported.
However, to access these settings manually:
Tap 1.
Start > Messaging > MMS.
Tap Menu >Tools > Options .2.
Select MMS > Servers tab > New. 3.
Connect via: The connection selected under “Connect Via” must have the
correct GPRS/Access Point already dened. The Access Point details should
be obtained from the service provider.
You will also need to obtain the exact details about the correct MMS
settings for your network from your service provider. These consist of the
Server name, Gateway, Port number, Server address URL, size limitation and
WAP version.
NOTE: Pay close attention to the entered Gateway and MMSC Server address; a single
incorrect character will prevent successful MMS messaging.