User's Manual

bought.
• When the mobile device is not placed on the charging surface properly, or depending on
the location of the mobile device’s wireless charging coil, your mobile device may not
charge properly.
• Depending on the location of the mobile device’s wireless charging coil, your mobile device
may not charge properly.
• Wireless charging may not work properly if you have attached a thick case to your mobile
device. If your case is thick, remove it before placing your mobile device on the wireless
charger.
• If you use the wireless charger in areas with weak network signals, you may lose network
reception.
• If you connect a charger to the mobile device during wireless charging, the wireless
charging feature will be unavailable.
• The wireless charger is compatible with WPC certified devices.
• To save energy, unplug the charger when not in use. The charger does not have a power
switch, so you must unplug the charger from the electric socket when not in use to avoid
wasting power. The charger should remain close to the electric socket and be easily
accessible while charging.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
Fast wireless charging
The wireless charger supports fast wireless charging. To begin fast wireless charging, place
a mobile device that supports fast wireless charging on the wireless charger.
Use only approved chargers that support fast charging (9 V/1.67 A).
Activating or deactivating the fast wireless charging feature
The fast wireless charging option will be added in your mobile device’s settings menu when
you place it on the wireless charger for the first time.
Place the mobile device on the wireless charger. On the Home screen of the mobile device,
tap Apps → Settings → Accessories, and then tap the Fast wireless charging switch to
activate or deactivate it. Deactivating this feature will switch the charging mode to normal
wireless charging and result in slower charging times.
Specification
• Radio Frequency Range: 110 kHz ~ 205 kHz
• Modulation: ASK
• Input voltage: DC 5.0 V, 2.0 A or DC 9.0 V 1.67 A
• Charging distance: ≤ 10 mm