User's Manual

Call barring:

Set limits each case to answer or dial the phone. Network

operators must first apply for international calling

features, and limit access network password, to set the

limit function.

This function needs the support of network operator,

please contact the network operator.

Call restrictions can be set for activate, deactivate and

query status

Advanced settings

Blacklist:

You can on or off this feature to edit the blacklist number,

up to 20 numbers can be edited. Open the function, the

blacklist numbers you call, the other shows you are on

the phone, and your phone is in a state of no response.

Auto redial:

You can enable or disable this feature, the feature is

turned on, after the dial-up, then if the other party does

not answer the phone over a period of time will be

automatically re-dial, redial the number up to 10 times, in

this period, the user can not call any other phone , to end

the re-dial, simply press the right soft key to cancel.

Call time reminder:

Can set the prompt type:

Off: When the phone call, no minutes of tone.

Single: Select 1-3000 seconds after the prompt enter

either of the time, when you call the phone at the time

when prompted.

Periodic: Select 30-60 seconds after the input in any one

time, when you call for every minute the phone will be

reminded of the time.

Auto quick end: open the function and set quick end time,

when the time out, the call will auto end.

Reject by SMS

You can set to on or off the feature, the feature is turned