User's Manual

1. Please use the standard battery and charger, or

may explode.

2. If the battery is completely discharged, the

battery icon should be in charge after 2 to 3

minutes to appear. Generally based on the current

state of the terminal (if boot, call, etc.) of different

charging time for 2 to 5 hours.

3. Please use the charger, charging as much as

possible to avoid using USB cable.

4. To ensure optimal battery performance, the

completion of two to three times the battery

charge and discharge cycles. Several new battery

initial charge, please charge more than 10 hours

straight.

5．Charging process, if you want to use to the

storage function, please set aside the charger,

then insert the USB data cable to use

6．The USB storage functions must be in the boot

before use.

2.6 Install the print paper

Opened the printer cover, printing paper tape end down

card into the bin, pulled out a short print paper, and then

close the printer cover, the printer can be used.