User's Manual

!
16
Delete delete the current message
Delete all delete all messages in the inbox.
Use number catch three or above number from the message, select anyone of the
number to call, IP dialing, save or send message.
Advanced edits the current message
 Use%URL% % % If!the!message!contains!the%URL,!you!can!use!the%URL!connect!to!
internet.!
 Copy%to%phone%storage!the!message!into!the!phone!memory.!
 Move to phone removed the message to the phone memory.
 Copy all copy all messages from SIM card/ phone
 Move all removed all messages from SIM card/ Phone
Edit option you can make text and copy all.
4.5.1.5 Templates
Press “OK” key to enter into the template list, you can edit, delete or create new
message while you selected the template.
4.5.1.6 SMS settings
When using the short message function you must first make the necessary settings.
Enter the “SMS settings” submenu to select SIM1/2 message settings to operate
as follows:
 Profile settings Please contact your network provider to get the SC address.
Profile list have four profiles because the different network supports
and SIM card. Select one Profile, press the Ok key “Edit”, can set
the Profile name, SC address, Validity period and Message type.
During Validity period, the short message service centre will
continuously resend a message until it is received. The message
Validity period is applicable for all sent messages. You can set the
message Validity period as any of the following: “1 hour”, “6 hours”,
“12 hours”, “1 day”, “3 days”,“1 Week” or “maximum”. The network
operators must support this function for it to be available. Message
type can select the Text, Fax, Page, E-mail by the left/right keys.
Note: Message Valid Perid, Fax, Page and E-mail need support by the network
operator.
 Common settings to set On/Off to the Delivery report or Reply path and save
sent message. If you set Delivery report as “On”, then when the
recipient receives your short message, or if the short message is not
received for some reason, the short message centre will send a status
report so that you can see whether the message has been delivered.If
you set save sent message as “On”, then when you sent the
message, it will be sent in the outbox.
Note: The network operator must support this function for it to be available.