User's Manual

!
25
Notice: the default phone code is 0000, please change to your own password
ASAP.
4.8.4.3 Auto keypad lock
Setup the phone to auto lock the keypad function. Select menu and press off (auto
keypad lock function invalid), 5 seconds, 30 seconds, 1 minute or 5 minutes to lock
the keypad, the keypad will auto lock while without any operation in standby mode.
Notice: if the keypad is locked in standby mode, press left soft key first, then
press send *key to unlock.
4.8.4.4 Change password
Phone lock will prevent others to theft and use your mobile phone. Enter into this
menu to change PIN code, PIN 2 code and phone password.
Note: in order to change the password successful, please must be enter 4 – 8
numbers
4.8.5 Restore factory settings
Enter the security code, the phone will restart and the menu settings will reset to their
original values.
Notice : Restore factory settings code is 0000.
4.9 User profiles
Your mobile phone provides many different user profiles for you to set your mobile
phone’s ring tone, according to case and environments.
In the main menu interface, select “User profiles”. Press the Left soft key to enter
the “User profiles” main menu where you will be able to see the options: “General”,
“Meeting”, “Outdoor”, “Indoor”, “Headset”and “Bluetooth”.
 General for use under general circumstances.
 Meeting for use in meetings. This requires presetting (for example, Alert
type set to the Vibration only).
 Outdoor for use in outdoor activities. This requires presetting (for example,
you can set the volume of the receiver and ring tone higher).
 Indoor for use in indoor activities. This requires presetting.
 Headset for use in headset activities, this mode will activate when earphone
insert. This requires presetting (for example, you can set the
volume of the receiver and ring tone lower).
 Bluetooth to connect the bluetooth earphone and succeed online.
Note: These six profiles have already been set and the default profile is
“General” when the mobile phone leaves the factory. On entering number of
dialing interface, hold down # key to quickly turn silence on or off.
Press the up/down keys to select the needful profile, then press the left soft key
“Options”:
Activate: to activate selecting profile.
Customize: for you to set your profile, select corresponding settings to