User's Manual

!
26
change.
Select “Customize” menu, press the left sof key “Ok”, will display the menu as
follows:
 Tone setup: to allow the user to customize different ring tones with different
option, for example, incoming call, power on or off, and so on.
 Volume： Two type of volume can be set: Ring tone (including incoming call,
alarm, power on, power off, message tone) and Key tone
(associated with key press).
 Alert type： This option allows the user to set the kind of alert he expects
whenever there is an incoming call. user can select only one
option from Ring, Vib.only, Vib.and ring and Vib. then ring.
 Ring type： This option allows the user to set mode of ring, include Single,
Repeat and Ascending.
 Extra tone： The user can turn on or off the tone as follows: Warning, Error,
Camp on and Connect.
 Answer mode： The user can select different modes
of answering: Any key (except for the Hang-up key, C key) and
Auto (display when the earphone insert).
4.10 Extra
4.10.1 Bluetooth
You can connect your phone to the compatible device through Bluetooth wireless
technology; the longest distance is 10 meters. Because it is through radio waves to
communicate, so your phone and other Bluetooth devices are not required to keep
face to face, but it may interfered by the wall and other electronic equipment.
In some areas, it may be limit to use the Bluetooth wireless technology, please
consult local department or network service provider.
Notice: use the Bluetooth wireless function and running other applications in
the background, these features may faster consume the battery voltage, and
short the battery life.
Enter into the Bluetooth function menu.
 Power press ok key to ON/ OFF the Bluetooth function.
 Visibility Settings can be searched or not
 My device
press ok key to enter into my device menu, it will show the connected
device history. Select one device and press ok key “option” to operate:
Connect
to connect with the device. You can select the service in
the service history to connect.
Disconnect disconnect with the device
Device name enter into to revise the device name
Delete delete the history
Delete all delete all history
Service lists display the service list of the device
 Search audio device