User's Manual

User Manual
14
plug once the battery is fully charged.
Note:
 Always keep the battery in ventilated place with the
temperature from
-10℃ t
o ＋50℃ during charging, and
make sure touse the charger provided by manufacturer. It may
c
ause danger once unapproved charger is used and it may
invalidate anyapproval or warranty.
 If the phone switches off automatically or there’s “Low
Battery” displayed on the phone, please charge to the battery
as quickas possible. The phone will reduce charging time
automatically if the battery power isn’t used up before
charging.
 The duration of standby time and duration of talk time offered
by manufacturer are based on ideal working environment.
Inactual use, however, the working time of battery changes
based on network condition, working environment and using
way.
 Make sure that the battery is installed properly before
charging and it’s forbidden to remove the battery during
charging.
 Please disconnect the charger and phone with power once
charging is over.
 If you don’t disconnect the charger with power and phone, the
phone begins charging again when the power loss reaches
certain extent after overcharging lasts for quite a long time
(about 5 – 8 hours). We suggest you don’t do this, as it
willinfluence the performance and lifetime of the battery
Connecting to network
SIM card
Make sure that you’ve inserted available SIM card to the phone before
your use. SIM card is the key to enter digital GSMnetwork.
All information related with establishing network connection and
calling record initiate are saved in metal area in SIM card. Meanwhile,
there’re other information saved in the SIM card, including name and phone
number saved in phone book and SMS.The SIM card can be removed from
your phone and inserted to any GSM phone (the new phone will read SIM
cardautomatically).
Never touch metal area the SIM card to avoid information loss or
damaging the card. Keep SIM card far away from electricityand magnet.
You can’t enter GSM network once the SIM is broken.