Technical data

48/132
D14D Camera Manual: Mounting
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
2 MOUNTING
2.1 Overview Of Mounting Options
2.1.1 Mounting Indoor Cameras To A Ceiling Or Wall (Without Accessories)
In order to mount the MOBOTIX D14D to a ceiling or wall, you need to drill the holes for
the fixtures. Use the supplied drilling template (fold-out at the end of this manual) to mark
the position for drilling the dowel holes and the holes through which the cables will be
led later on. Remember to position the drilling template according to the direction of
the camera’s PIR sensor.
Connecting The Camera Patch Cable To The Network Cable (for example, Cat 5)
• Position the camera housing over the cable exit.
• Connect the camera patch cable securely to the Ethernet cable, for example, using
the MX-Patch-Box.
• Use the proper screws to mount the camera housing to the wall or ceiling.
Preventing Condensation
When installing the camera, make sure that the PIR sensor is pointing downwards to
allow condensation to flow freely through the openings in the outer shell (see diagram).
PIR: Passive
infrared sensor
120°
120°
120°
R=75 mm
45°
30°
2.80m
1.50m
2.90
The folded drilling
templates can be found
at the end of the manual