Technical data

58/132

D14D Camera Manual: Mounting

www.mobotix.com • sales@mobotix.com

2.3.2 Overview Of Cable Connections

The following cables can be used with the D14:

•

MOBOTIX Ethernet cable: This MOBOTIX cable is pre-installed at delivery

and is intended for direct connection to a network outlet. If the D14D is

to be installed outdoors, the MOBOTIX MX-Patch-Box should be used

(optional accessory).

• MOBOTIX USB cable with Mini USB connector: This MOBOTIX cable

provides the required impermeability, even in adverse weather conditions,

and thereby prevents corrosion of the connections.

• Multi-wire cable for MxBus connections: Additional MOBOTIX modules

can be connected via this multi-wire cable in the future. The wires of this

cable are led along the bottom of the camera and then pushed through

the sealing membranes and into the cable guides.

Caution

Only MOBOTIX cables may be used for the Ethernet and USB connection to ensure

that the cable cover remains permanently sealed.

Note

Appliances with a combined maximum power consumption of 2.5W may be connected

to the MxBus connector. If additional devices are connected to the MxBus connector

and to the Mini USB connector, the power consumption of all connected devices may

not amount to more than 4W.

If additional modules are connected, which in total consume more than 1 W, the maximum

environmental temperature is limited to 50°C (122°F).

MxBus

Mini USB

Ethernet

for LAN

Mini USB

Connection of additional

devices (via MxBus/Mini

USB): Max. environmental

temperature 50°C (122°F)