User manual

2.1.2 Additional Mounting Options for IT/Secure Models
On-Wall Mounting
The D22 On-Wall set can reliably protect external ca-
bles if the cables cannot be guided from below the
housing but have to be led above the wall. In addition,
the On-Wall mount provides ample space for extra
modules.
In-Ceiling Mounting
The D22 In-Ceiling Set allows mounting the D22 cam-
era in fake ceilings, for example. This type of installa-
tion provides optimum protection for the camera and
reduces the visible profile to a minimum since only the
dome is visible.
Vandalism Protection
The D22 Vandalism Set provides added protection for
D22 cameras. The set consists of a robust camera ring
made from stainless steel and a reinforced dome
made from 3mm thick polycarbonate. A camera
equipped with the Vandalism Set is perfectly suited for
applications in demanding environments (such as pris-
ons, social hot-spots, train stations, etc.).
Mounting to a Wall Using the Wall Mount
The D22 Wall Mount is the ideal solution for mounting
the D22 to walls for indoor and outdoor applications.
The camera is absolutely dustproof and resistant
against water jets (IP65). The wall mount also covers
RJ45 wall outlets and also has ample space for addi-
tional modules.
Mounting to a Pole
If you would like to mount the MOBOTIX D22 to a pole,
you should consider using the MOBOTIX Corner and
Pole Mount. This mount can only be used in conjunc-
tion with the wall mount. The supplied stainless steel
straps allow fixing the mount to poles with diameters
between 60 and 180mm (2.4 to 7.1in).
For more information on the D22 and the available ac-
cessories, please consult
section 2.11 and also refer to
shop.mobotix.com.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
25/100
D22 Camera Manual Part 1
D22 On-Wall Set
(IP65, also for Outdoor
applications)
D22 In-Ceiling Set
D22 Vandalism set con-
sists of stainless steel
ring (IP65, available pol-
ished, matt or powder-
coated)
D22 Wall Mount made
from sturdy PBT 30GF
(IP65)
D22 Corner and Pole
Mount: Outdoor quality
made of 3mm stainless
steel (in conjunction with
Outdoor Wall Mount)