User manual

2.5 Mounting the Camera 48
2.5.1 D22-IT/Secure 48
2.5.2 D22-Basic 49
2.5.3 Finishing the Installation 52
2.5.4 Notes on Mounting the Camera to a Wall Without the Wall Mount 54
2.6 Mounting the D22 to a Ceiling Using the On-Wall Set 56
2.7 Mounting the D22 to a Ceiling Using the In-Ceiling Set 58
2.8 Mounting the D22 Vandalism Set 60
2.9 Mounting the D22 to a Wall Using the Wall Mount 62
2.10 Notes 64
2.10.1 Cleaning Instructions 64
2.10.2Wiring, Fire Prevention, Lightning and Surge Protection 64
2.11 Camera Accessories 66
3 OPERATING THE CAMERA 70
3.1 General Procedure 70
3.1.1 Establishing the Power Supply to the Camera 70
3.1.2 Connecting the Camera 70
3.2 Overview of the Configuration Settings 72
3.3 Connecting the Camera to the Network and to the Power Supply 74
3.3.1 Notes on Cable Lengths and Power Supply 74
3.3.2 Camera Startup Sequence 75
3.3.3 Power Supply (MX PoE) Using a Switch 76
3.3.4 Power Supply (MX PoE) Directly Connected to a Computer 76
3.3.5 Power Supply (MX PoE) Using a Network Power Rack or Network
Power Box 77
3.3.6 Power Supply (PoE IEEE 802.3af) Using Power-over-Ethernet Products 77
3.4 The First Image from the Camera 78
3.4.1 Preparing the Ethernet Connection 78
3.4.2 The First Image in the Browser 80
3.4.3 Additional Information 81
3.4.4 Camera Screens in the Browser 82
3.4.5 Access Using Zeroconf/Bonjour 84
3.4.6 The First Image in MxControlCenter 88
3.5 Starting the Camera With an Automatic IP Address (DHCP) 94
3.6 Starting the Camera Using the Factory IP Address 95
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
2/100
D22M Camera Manual Part 1