User manual

2.5.4 Notes on Mounting the Camera to a Wall Without the Wall Mount
The MOBOTIX D22 has been designed to be mounted to either ceilings or to a
wall, when using the Wall Mount. It is also possible to mount the D22 directly to a
wall (without using the Wall Mount), but doing so will result in reduced flexibility for
positioning the lens. The following section contains some hints on these restrictions
and tips for mounting the camera to a wall.
When mounting the camera onto a wall, the camera image will show more wall
area (and less room area), the more you move the position of the camera from the
center of the wall toward a corner.
In order to show a larger portion of the room (and less wall area) when using a
MOBOTIX D22 mounted to a Wall Mount, you can turn the base of the camera and
the lens unit around its vertical axis. The camera image always stays upright. When
mounting the D22 directly onto a wall, you can also turn the base of the camera
around its vertical axis to show more room area, but the image now appears
slightly tilted.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
54/100
D22 Camera Manual Part 1
2m/6ft
Center of the room
0° 10° 30°
0°
ca. 10°
ca. 30°
2m/6ft 2m/6ft 2m/6ft
1m/3ft