User manual

• Disengage the mounting ring from the hous-
ing of the D22-IT/Secure. This ring is not re-
quired when mounting the camera to the On-
Wall Set.
• Connect the network cable to the network ca-
ble of the camera using a patch cable con-
nector. Make sure to leave enough unused
cable within the housing. This will ensure that
you can turn the lens unit freely later on. Ca-
ble that is too long can be stored easily within
the On-Wall mount.
• Now press the D22 into the guides of the On-
Wall mount. The tapered guides on the back
of the D22 housing fit exactly into the open-
ings of the On-Wall mount.
• Continue with section 2.5.3,
Finishing the Mounting Process .
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
57/100
D22 Camera Manual Part 1