User manual

2.7 Mounting the D22 to a Ceiling Using the In-Ceiling Set

Before mounting the MOBOTIX D22-IT/Secure to an indoor location using the In-

Ceiling Set, you need to prepare the network connection and drill the hole for the

camera:

• Network connection: The network cabling is supplied through the ceiling di-

rectly above the camera.

When preparing the installation, you should make sure that you have at least

15cm (6in) of unused cable.

• Hole for the camera: Prepare the hole for the camera. The hole should have

a diameter of 150mm (6in)!

Procedure

• Insert the camera into the In-Ceiling mount

without the outer shell and the mounting

ring. The tapered guides on the back of the

D22 housing fit exactly into the openings of

the In-Ceiling mount.

• Connect the network cable to the network

cable of the camera using a patch cable

connector.

www.mobotix.com • sales@mobotix.com

58/100

D22 Camera Manual Part 1

Find the drilling template

at the end of the manual