User manual

• Connect the network cable to the network
cable of the camera using a patch cable
connector (or plug the cable directly into the
RJ45 wall outlet). Make sure to leave enough
unused cable within the housing. This will en-
sure that you can turn the lens unit freely
later on. Cable that is too long can be stored
easily within the housing.
• Now press the D22 into the guides of the
wall mount. The tapered guides on the back
of the D22 housing fit exactly into the open-
ings of the On-Wall mount.
• Continue with section 2.5.3,
Finishing the Mounting Process .
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
63/100
D22 Camera Manual Part 1