User manual

• Avoid induction: When running data cables parallel to existing regular po-

wer lines or high-voltage wires, make sure you observe the minimum distan-

ces to the power cables.

Fire Prevention

When installing the power lines to the camera, make sure you always adhere to

the relevant regulations on wiring and fire prevention at the site of the installation.

Lightning and Surge Protection

To prevent damage from lightnings and surges, make sure you follow these guide-

lines:

• Lightning conductors: In areas exposed to lightning (e.g. on roofs), a distan-

ce holder (1m (3ft) higher, 1m (3ft) away from the camera) and proper

lightning conductors need to be installed in order to prevent lightning strikes

into the camera and to ensure that the energy of a lightning strike is properly

led to the ground.

• Surge protection: Make sure you have installed proper protection against

electrical surges in order to prevent damage to the camera, the building and

the network infrastructure. This includes surge protectors for 19" racks, ad-

ding an uninterruptible power supply (UPS) to the MOBOTIX camera, and in-

stalling surge arresters or similar for routers, switches, servers, etc.

www.mobotix.com • sales@mobotix.com

65/100

D22 Camera Manual Part 1