User manual

The configuration follows these steps:
1) Establish the first connection (via the Ethernet network).
2) Set the parameters for the desired connection type (Quick Installation).
3) Set the event control (see chapter 7,
Events, Actions and Messages in the
Software Manual ).
4) Set the storage parameters (FTP, internal and external ring buffer storage).
5) Store the configuration in the camera's permanent storage (flash).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
71/100
D22M Camera Manual Part 1
Always use Quick Instal-
lation for initial configu-
ration
Note
After first booting a new MOBOTIX camera or after resetting to factory
defaults, accessing the Administration menu (Admin Menu button) will
automatically start the Quick Installation wizard. This is where you
configure the most important camera parameters in a step-by-step
manner. If you have completed the Quick Installation wizard at least
once, the standard Administration menu will open when you click on
the Admin Menu button.
Live image: http://preparkcam.mobotixserver.de