User manual

Once you have finished configuring the camera, you should always store the set-
tings in the camera's permanent memory. You can do so in each dialog (clicking
on Set at the bottom of each dialog will temporarily set the changes; clicking on
Close will ask you to store the complete configuration in the cameras permanent
memory) or in the Configuration section of the administration menu (Admin
Menu> Store current configuration into flash memory).
The Configuration section of the administration menu provides more functions for
storing, copying and managing camera settings. For additional information on this
topic, see chapter 5,
Basic Camera Configuration , in the Software Manual .
A camera that keeps time
Apart from a multitude of possibilities for controlling the camera using time (time
tables, holiday and vacation, scheduled tasks, etc.), the camera can also synchro-
nize its internal clock. This allows you to keep the camera in synch manually with
a computer or fully automatic using a time server or another MOBOTIX camera.
The camera can use NTP time servers or time servers providing Time Protocol (RFC
868). For additional information on this topic, see section 5.4.2,
Date and Time /
Time Zones and Time Servers
, in the Software Manual .
MOBOTIX cameras can do "More"
In order to improve the readability of the camera dialogs, some of them hide less-
often used options when showing the dialog. These dialogs have a More button in
the bottom right corner; click on it to display the advanced options. If all options are
displayed, the Less button appears. Clicking this button will hide the advanced opti-
ons.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
73/100
D22M Camera Manual Part 1
Make sure to permanently
store changed parame-
ters!
Automatic time synchroni-
zation using a time server
Click on the More/Less
buttons to show/hide the
advanced options