User manual

3.3.3 Power Supply (MxPoE) Using a Switch
• Connect the factory pre-installed cable of the camera to the Camera connec-
tor of the Network Power Adapter.
• Connect the LAN/Power connector of the Network Power Adapter to an Eth-
ernet connector of the switch/router or the Ethernet wall outlet.
• Plug the RJ45 connector of the external power unit into the PC/Power con-
nector of the Network Power Adapter.
3.3.4 Power Supply (MxPoE) When Connected Directly to a Computer
• Connect the factory pre-installed cable of the camera to the Camera connec-
tor of the Network Power Adapter.
• Connect the PC/Power connector of the Network Power Adapter to the Ether-
net port of the computer.
• Plug the RJ45 connector of the external power unit into the LAN/Power con-
nector of the Network Power Adapter.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
76/100
D22M Camera Manual Part 1
MOBOTIX power supply
and Network Power
Adapter required
MOBOTIX power supply
and Network Power
Adapter required
The Network Power
Adapter replaces the
crossover cable when di-
rectly connecting to a
computer