User manual

3.3.5 Power Supply (MxPoE) Using a Network Power Rack or Network Power
Box
• Connect the factory pre-installed cable of the camera to the CAM connector
of the Network Power Rack (MX-NPR-8/20) or the Network Power Box
(MX-NPR-4).
• Connect the LAN connector of the Network Power Rack or Network Power
Box to an Ethernet connector of the switch/router.
3.3.6 Power Supply (PoE IEEE 802.3af) Using Power-over-Ethernet Products
• Connect the factory pre-installed cable of the camera to the Ethernet connec-
tor of the PoE switch/router. The switch/router needs to support the PoE stan-
dard IEEE 802.3af.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
77/100
D22M Camera Manual Part 1
MOBOTIX Network
Power Rack or Network
Power Box required
Use the 19" MOBOTIX
Netpower rack-mount
units to supply power to 8
or 20 cameras
Use the MOBOTIX Net-
work Power Box for
smaller installations
Uninterruptible power
supply (UPS) should be in-
stalled
PoE switch/router accord-
ing to IEEE 802.3af re-
quired
PoE IEEE 802.3af!