EN D24M: Camera Manual The HiRes Video Company HiRes 3 Megapixel 2048 x 1536 Software zoom EN Skyline Format free Each image format freely definable 30 Frames/s VGA (640 x 480) 30 F/s Mega Virtual PTZ Digital pan, tilt, zoom Backlight Safe using CMOS without mechanical iris Internal DVR Fits In. Watches Out. Internal via Flash, external via Network The D24M MonoDome camera adapts perfectly to any task.
/148 D24-Camera Manual: Camera Data Enter your camera data here. Camera model: Camera name: Factory IP address: Current IP address: DHCP: Admin user name: Admin password: See Section 3.7.2 Note MOBOTIX offers inexpensive seminars that include workshops and practical exercises: Basic Seminar three days, Advanced Seminar two days. For more information, please visit www.mobotix.com. © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
/148 Contents Contents Foreword 6 The MOBOTIX Concept 8 Superior Storage Solution 10 Added Security Value 12 Cost Benefits And Technical Advantages 14 1 INTRODUCTION 16 1.1 D24M Overview 16 1.2 D24M: The Next Generation HiRes Mono Dome Camera 23 1.3 General MOBOTIX Camera Functions 24 1.4 Lens Options, Hardware And Software Features 30 2 INSTALLATION 34 2.1 Preparing The Installation 34 2.1.1 2.1.2 2.1.3 2.1.4 2.1.
/148 D24-Camera Manual: Contents 2.5.2 2.5.3 2.5.4 2.5.5 Required Tools Overview: Procedure For All D24M Cameras Procedure For D24M IT/Secure Procedure For D24M Basic 55 56 57 58 2.6 Mounting The Camera With The On-Wall Set 60 2.6.1 Mounting Instructions 2.6.2 On-Wall Set 2.6.3 Procedure 60 61 64 2.7 66 Mounting The Camera With The In-Ceiling Set 2.7.1 Mounting Instructions 2.7.2 In-Ceiling Set 2.7.3 Procedure 66 67 70 2.8 72 Installing The Vandalism Set 2.8.1 Mounting Instructions 2.8.
/148 Contents 3 OPERATING THE CAMERA 98 3.1 Manual And Automatic Operation - Overview 98 3.1.1 Manually Using A Computer In The 10.x.x.x IP Address Range 3.1.2 Automatically Using MxControlCenter Or MxEasy 3.1.3 Automatically Using DHCP 99 100 101 3.2 First Images And The Most Important Settings 102 3.2.1 3.2.2 3.2.3 3.2.4 3.2.5 3.2.
/148 D24M Camera Manual: Foreword Foreword Dear MOBOTIX customer, Congratulations on your decision to purchase an exceptionally powerful and compact network camera "Made in Germany." Like all MOBOTIX cameras, the D24M Mono Dome uses a high-resolution color image sensor with 3.1 megapixels as standard and offers premium quality combined with convincing features. This Camera Manual will give you an initial overview of the superior and innovative MOBOTIX concept.
7/148 D24M - high-resolution and discreet video monitoring in a bank © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
/148 D24M Camera Manual: The MOBOTIX Concept The MOBOTIX Concept HiRes Video Innovations The German company MOBOTIX AG is known as the leading pioneer in network camera technology since its founding in 1999, and its decentralized concept has made highresolution video systems cost-efficient. Whether in embassies, airports, railway stations, ports, gas stations, hotels or on highways - over one hundred thousand MOBOTIX video systems have been in operation on every continent for years.
/148 The Decentralized MOBOTIX Concept Unlike other systems, with the decentralized MOBOTIX concept, a high-speed computer and, if requested, digital memory (MicroSD/SD card) is built into every camera for long-term recording. The PC now serves purely for viewing, not for analysis or recording. As a result, MOBOTIX cameras can record in response to an event, even without the PC being switched on, and digitally store the videos with sound.
/148 D24M Camera Manual: Superior Storage Solution Superior Storage Solution The Market Demands Better Image Quality When it comes to future-proof video surveillance systems, it is not a matter of analog or digital but whether it is high-resolution or not. It is important to note that only HiRes video with decentralized network camera technology can be implemented at a much lower cost than any other type of video surveillance system.
/148 Flash memory is a sophisticated form of semiconductor memory without mechanical moving parts and represents the storage medium of the future thanks to its reliability, ease of use and low cost.
/148 D24M Camera Manual: Added Security Value ADDED SECURITY VALUE Robust, Low-Maintenance Technology The real added value of MOBOTIX products is reflected in characteristics such as enhanced functionality, long life and robustness. In general, MOBOTIX cameras have no moving parts. This makes the cameras very resistant to wear and tear, and reduces both maintenance costs and power consumption.
Sound Increases The Chance Of Detection In the event of an alarm, MOBOTIX cameras can turn on their built-in microphones and record lip-synchronized sound. They are therefore an even greater help in analyzing a situation and easing clarification. In addition, the video system can be used for bidirectional communication via a loudspeaker/microphone.
/148 D24M Camera Manual: Cost Benefits And Technical Advantages The Most Important Cost Benefits 1 2 3 4 5 6 7 8 9 10 Increased resolution reduces amount of cameras needed 1536-line, high-resolution sensors give a better overview and allow monitoring an entire room with just one camera from the corner Reduced installation costs at any distance Standard Ethernet connection enables the use of use of common network components such as fiber, copper and wireless (WLAN) Intelligent recording technology red
/148 The Most Important Technical Advantages Progressive-scan instead of half-frame blur Megapixel sensor and image processing inside camera with digital white balance generates sharp and true color images at every scale Sun and backlight compensation CMOS-sensor without auto iris, digital contrast enhancement and configurable exposure measurement zones guarantee optimal exposure control Dual camera technology: 2-in-1 Two possible camera views with picture-in-picture technology or 180° panoramic vie
/148 D24M Camera Manual: INTRODUCTION 1 INTRODUCTION 1.1 D24M Overview 90° Room monitoring 90° Raumüberwachung Overview of 3 elevators 3 Fahrstühle im Überblick With the D24M series, MOBOTIX offers extremely compact, versatile and cost-effective mono dome cameras with up to 1,536 scan lines, an integrated video sensor and longterm internal storage on a MicroSD card (not available in the basic model).
D24M Overview 17/148 A Master Of Adaptability All D24M models come with an easily interchangeable lenses and a robust 1.5 mm thick polycarbonate dome. An extensive range of accessories is also available for installing the camera in an application-optimized manner, for supplying power or expanding the functions of the camera. Furthermore, MOBOTIX customers can take advantage of MxEasy or the professional control center software MxControlCenter free of charge and with an unlimited user and camera license.
/148 D24M Camera Manual: INTRODUCTION The Right Lens For Every Application You can change the lens in the D24M camera models on site whenever necessary. Each lens is secured by a lock ring. Each camera has a factory-aligned and quality-tested lens, which makes on-site camera focusing unnecessary in most cases. The D24M cameras are available for delivery with a lens of your choosing or no lens at all.
D24M Overview 19/148 Virtual PTZ (vPTZ) – No Motor Required The D24M can zoom in on detail as well. These vPTZ functions are a standard feature in the integrated D24M camera software. The image from the mono dome camera can be enlarged using e.g. the mouse wheel, a joystick or a software-controlled PTZ panel, and you can "move" the view to any section of the image. This provides the features of a mechanical PTZ camera without the disadvantages of maintenance and wear.
/148 D24M Camera Manual: INTRODUCTION Simultaneous Zoomed Live Image And Full Image Recording All conventional, motorized PTZ cameras only store the image that is currently viewed as the live image (live image recording). This has one serious disadvantage as the recording can only show what has happened in the "visible" portion of the image; the rest is lost and cannot be examined later on. For this reason, MOBOTIX has added the new full image recording feature to the D24M.
D24M Overview 21/148 Internal DVR The D24M IT/Secure model features direct recording to integrated MicroSD cards, which makes the camera fully independent of any external storage media, even for longer periods of time. The camera internally stores high-resolution video, without requiring an external recording device or PC and therefore without overloading the network whatsoever. Old recordings may be overwritten automatically or automatically deleted after a specified period of time.
/148 D24M Camera Manual: INTRODUCTION The integrated DVR functionality with long-term storage on a MicroSD card also makes the camera an ideal solution for mobile applications since it only requires a power supply via the network cable (standard PoE) for full event-driven recording with video and audio, thus delivering a complete standalone product. Application examples in this context are installations in public transportation such as busses, trains, aboard ships, airplanes, etc.
D24M: The Next Generation HiRes Mono Dome Camera 1.2 D24M: The Next Generation HiRes Mono Dome Camera The D24M camera is the more powerful successor to the D22M and is delivered with a recording capacity of 4 GB integrated as standard. The D24M has a new microprocessor and a modified system platform. The result is more than twice the processing power, which enables smooth video frame rates, even in the high-resolution megapixel display. Frames Rates Have Doubled Even 3.
/148 D24M Camera Manual: INTRODUCTION Audio features for the D24M only available in combination with the ExtIO module (MOBOTIX accessory) 1.3 Camera vPTZ functions can be controlled with a mouse or joystick vPTZ: Virtual Pan/Tilt/Zoom Features Using a joystick: Internet Explorer with activated MxPEG ActiveX plugin, MxControlCenter or MxEasy required MxControlCenter and MxEasy can be downloaded free of charge at www.mobotix.
/148 General MOBOTIX Camera Functions Voice Over IP Moreover, MxPEG provides for lip-synchronous live audio and two-way communication between the camera and a computer. Room surveillance is possible using a browser (Internet Explorer), MxControlCenter or MxEasy. Customized alarm notification on your mobile phone or via Internet telephony is just as easy as event-controlled voice messages directly from the camera.
/148 D24M Camera Manual: INTRODUCTION Event And Time-Controlled Just like triggering event-controlled recording upon detecting movements in the image, the camera can also record when the volume detected by a microphone exceeds a certain trigger value. Using scheduled daily recording, time tasks can start or stop video recording, upload images to a website or send e-mails with video/audio clips. Vacation times and holidays can be programmed.
General MOBOTIX Camera Functions 27/148 30 Cameras Live Using MxControlCenter Instead of using a web browser, you can also download the free MxControlCenter from the MOBOTIX website, which allows you to quickly display up to 30 MOBOTIX cameras on one single monitor. In addition, MxControlCenter can process incoming alarms with sound from the cameras and allows you to conveniently search and evaluate alarm video clips (including audio).
/148 D24M Camera Manual: INTRODUCTION All settings selected in MxEasy (e.g. virtual camera position, zoom, brightness, volume, microphone sensitivity, image storage, signal outputs) are usable immediately and are stored instantly in the configuration of the corresponding camera. The calendar function integrated in the Alarm Planner provides access to innovative features for scheduled settings of one or more cameras.
General MOBOTIX Camera Functions 29/148 • Time Tables with handling of customized holidays and vacations. The time tables are used to control the camera's arming, image recording messaging, logos, the obscure image function as well as other features. • Remote signaling for master/slave cameras, with the master camera controlling the arming status of the slave cameras. This allows, for example, all slave cameras to be armed using a key switch connected to the master camera.
/148 D24M Camera Manual: INTRODUCTION 1.4 Lens Options, Hardware And Software Features MOBOTIX currently offers five standard lenses with M14 thread from the L22 Super Wide Angle lens with a 22 mm focal length through to the L135 Telephoto lens with a 135 mm focal length (equivalent to 35 mm camera). Since MOBOTIX cameras are backlight-proof, they do not require a mechanical auto iris, making them extremely robust and maintenance-free.
/148 General MOBOTIX Camera Functions Lens Table L22 L32 L43 L65 L135 22 mm (1.26 in) 4 mm (0.16 in) 32 mm (1.26 in) 6 mm (0.24 in) 43 mm (1.69 in) 8 mm (0.31 in) 65 mm (2.56 in) 12 mm (0.47 in) 135 mm (5.31 in) 25 mm (0.98 in) Aperture 2.0 2.0 2.0 2.0 2.5 Horizontal image angle 90° 60° 45° 31° 15° Vertical image angle 67° 45° 34° 23° 11° Distance 1 m (1.09 yd) m m m m m Image width 2.0 1.1 0.8 0.5 0.3 Image height 1.3 0.8 0.6 0.4 0.2 Distance 5 m (5.
MX-D24M-Sec-Night-N22 D24M‑Sec-Night MX-Q24M-Sec-D22 D24M‑Sec MX-D24M-IT-D22 D24M‑IT MX-D24M-Basic-D22 D24M Camera Manual: INTRODUCTION D24Mi ‑Basic 32/148 D24M Hardware Features *Special MiniUSB adaptor cable available as an accessory Outdoor weatherproof IP54 IP65 IP65 IP65 Ethernet/MiniUSB* X/- X/X X/X X/X MicroSD slot - X X X Mono (M) / Dual (D) M M M M B/W Image sensor **A 4 GB MicroSD card is included with all D24M IT/Secure models MicroSD cards of up to 32 GB may be us
/148 General MOBOTIX Camera Functions The Web version is only available for the M12 M12 IT Model Secure Model Q24M Web Model D24M M22M Basic Model D12 X* X X X Software Features (All Models) Digital zoom (continuous) with panning Motion JPEG/MxPEG video streaming X/X X/X X/X X/X Custom exposure windows X X X X Video motion detection X X X X Time and event control (FTP, e-mail, logos) X X X X Weekly schedules/holidays - X X X Web functionality (FTP, e-mail) X X X
/148 D24M Camera Manual: INSTALLATION 2 INSTALLATION Although the D24M is primarily designed for installation on walls and ceilings, it can also be mounted to a pole or the corner of a building, for example, using the appropriate MOBOTIX accessories. The different installation options are described in sections 2.4 and below, while the drilling templates can be found at the end of the manual. 2.
D24M Camera Manual: INSTALLATION 2.1.1 Ceiling And Wall Mounting Like all MOBOTIX cameras, the D24M is extremely flexible in terms of how and where it can be installed (see Section 2.1.2). The Basic model meets the IP54 standard while the IT and Secure models are weatherproof in accordance with IP65. However, installations on a wall or ceiling are the most common mounting positions. In indoor spaces, the D24M is usually mounted from the ceiling.
/148 D24M Camera Manual: INSTALLATION Wall Installation Using The Outdoor Wall Mount Outdoors, the D24M is usually mounted on a building wall. In principle, the camera can be installed without additional wall mounts, although the positional range of the lens may be limited as a result. We therefore recommend using the practical Wall Mount from the range of available accessories (Section 2.4). The cable exit of the D24M is located in the center of the housing's underside.
D24M Camera Manual: INSTALLATION 37/148 2.1.2 Mounting Options For IT/Secure Models On-Wall Installation (MX-OPT-AP) The On-Wall Set can reliably protect external cables if the cables cannot be fed in the center below the camera housing. The On-Wall Mount also provides ample space for extra modules.
/148 D24M Camera Manual: INSTALLATION 2.1.3 Network Connection And Power Supply, UPS Power over Ethernet (PoE Conforming To IEEE 802.3af) The D24M supports the Power over Ethernet standard IEEE 802.3af (PoE) All D24M models are supplied with power using the PoE standard. The Network Power Adapter (MX-NPA-PoE-Set) may be used for smaller installations. For larger installations, it is worth investing in a PoE-capable supply device currently available on the market (PoE switch/router).
D24M Camera Manual: INSTALLATION 39/148 Using Uninterruptible Power Supplies (UPS) In order to maintain a continuous power supply even when utility power fails, you should install an uninterruptible power supply (UPS). These devices also provide some protection against electrical surges and voltage fluctuations and thus enhance the reliability of the system as a whole. By using a more powerful 19" rack-mounted UPS, you can also protect all other network components (e.g.
/148 D24M Camera Manual: INSTALLATION 2.1.5 Wiring, Fire Prevention, Lightning And Surge Protection When installing the wiring inside or outside of buildings, make sure you always adhere to the relevant regulations on wiring, fire prevention and protection against lightning. MOBOTIX cameras are protected against the effects of small electrical surges by a range of measures. These measures, however, cannot prevent the camera from being damaged when stronger electrical surges occur.
D24M Camera Manual: INSTALLATION Notes © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
/148 D24M Camera Manual: INSTALLATION 2.2 D24M IT/Secure: Delivered Parts, Components, Dimensions 2.2.1 Delivered Parts And Camera Components Of D24M IT/Secure 1.1 1.12 1.2 1.3 1.10 1.11 1.4 1.8 1.6 1.14 1.13 1.5 1.15 1.7 Item Quantity Part Name 1.1 1.2 1.3 1.4 1.5 1 1 1 1 1 Camera housing Lens Lock ring Dome, transparent CAT5 Ethernet cable, 0.5 m, pre-installed 1.6 1 Allen wrench 3 mm 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.
/148 D24M Camera Manual: INSTALLATION 2.2.2 D24M IT/Secure Camera Housing And Connectors The MOBOTIX D24M IT/Secure consists of the camera housing (motherboard, lens, dome), the outer shell and the mounting ring. Connections • Network (Ethernet network incl. PoE supply) • MiniUSB (e.g. for ExtIO) • Slot for MicroSD card Outer shell Dome Lens unit Key R LEDs Slot for MicroSD card MiniUSB (e.g. for ExtIO) Network Connection © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.
D24M Camera Manual: INSTALLATION 2.2.3 Dimensions Of D24M IT/Secure Camera module can be freely rotated and tilted By rotating the camera module on both axes, you can aim the lens at the precise area you want to record. 85 mm 44/148 160 mm © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
D24M Camera Manual: INSTALLATION 45/148 2.2.4 Drilling Template For The D24M IT/Secure Mounting Ring Find the drilling templates (scale 1:1) at the end of the manual as a fold-out Notes Use the folded drilling template at the end of the manual. Make sure that the drilling template is not scaled or adjusted to the paper size when printing the PDF file (enlarged or reduced).
/148 D24M Camera Manual: INSTALLATION 2.3 D24M Basic: Delivered Parts, Components, Dimensions 2.3.1 Delivered Parts And Camera Components Of D24M Basic 2.1 2.12 2.2 2.3 2.10 2.11 2.7 2.4 2.6 2.4 2.5 2.13 2.5 Item Quantity Part Name 2.1 1 Camera housing 2.2 1 Lens 2.3 1 Lock ring 2.4 1 Dome, transparent 2.5 1 CAT5 Ethernet cable, 0.5 m, pre-installed 2.6 1 Allen wrench 3 mm 2.7 1 Hook wrench 2.10 4 Universal screw anchors 8 mm 2.11 4 Stainless steel washers Ø 5.
/148 D24M Camera Manual: INSTALLATION 2.3.2 D24M Basic Camera Housing And Connector The MOBOTIX D24M Basic consists of the camera housing with the motherboard, the lens and the dome. Connections • Network (Ethernet network incl. PoE supply) Dome Connections Lens unit Network Connection (Rear of the camrea, see 2.2.2) Key R LEDs © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
D24M Camera Manual: INSTALLATION 2.3.3 Dimensions Of D24M Basic Camera module can be freely rotated and tilted By rotating the camera module on both axes, you can aim the lens at the precise area you want to record. 85 mm 48/148 129 mm © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
D24M Camera Manual: INSTALLATION 49/148 2.3.4 Drilling Template For The D24M Basic Find the drilling templates (scale 1:1) at the end of the manual as a fold-out Notes Use the folded drilling template at the end of the manual. Make sure that the drilling template is not scaled or adjusted to the paper size when printing the PDF file (enlarged or reduced). When printing the PDF file, you should print two pages onto one using 100% scaling to obtain an unscaled printout of the drilling template.
/148 D24M Camera Manual: INSTALLATION 2.4 Available D24M Accessories - Overview On-Wall Set (MX-OPT-AP) Consists of On-Wall Mount and mounting supplies. Conforms to U.S. installation standards. Reliably protects the cabling and allows additional modules to be integrated within the On-Wall Mount (patch/installation cable connector, IO extensions, WLAN, battery, ...). 10° On-Wall Set (MX-OPT-AP-10DEG) Consists of On-Wall Mount and mounting supplies for inclined installation (10°) of a camera.
D24M Camera Manual: INSTALLATION In-Ceiling Set (MX-OPT-IC) For simple installation in false ceiling tiles. Suitable for discreet surveillance. Optionally available with a stainless steel ring. 51/148 Also suitable for mounting to drywall Outdoor Wall Mount (MX-OPT-WH) Consists of Outdoor Wall Mount and mounting supplies. Covers RJ45 flush-mounted sockets. Space for expansion modules (battery, UMTS, WLAN, etc.). Easily mounted to poles using Pole Mount. Weatherproof IP65.
/148 D24M Camera Manual: INSTALLATION ExtIO Function Extension (MX-ExtIO) The ExtIO contains a powerful speaker, microphone, infra-red motion sensor, environmental temperature sensor, 2 input and 2 output contacts and 2 illuminated buttons. It is ideal for door communication, elevators, access control, etc. The ExtIO may be operated directly with the D24M over a separately available MOBOTIX MiniUSB cable.
/148 D24M Camera Manual: INSTALLATION Mx2wire Media Converter (MX-2wire-Set-PW) The Mx2wire system allows you to set up an Ethernet network with PoE via two-wire telephone cables of up to 500 m in length. This allows an existing two-wire analog telephone line to be used to connect a 10/100 Mbps Ethernet device (e.g. PC, WLAN, IP camera, IP telephone or IP door station). The achievable data rate is up to 30 Mbps. Around 15 Mbps can be reached even with 500 m of antenna cable.
/148 D24M Camera Manual: INSTALLATION 2.5 Mounting The Camera Without Accessories 2.5.1 Mounting Instructions As an allround camera, the D24M is primarily designed for installation on walls or ceilings. In general, direct installation of the camera without any accessories is always possible. However, to ensure a flush finish with the surface, you should first install a flushmounted wall outlet (space for the connection cable).
D24M Camera Manual: INSTALLATION 2.5.2 Required Tools Please first check that all the components supplied with the camera are present in the original packaging (see Section 2.2 or 2.3). The Following Additional Tools Are Required For Installation: • Any additional materials for fastening the camera to a ceiling/wall, if necessary – 4 Torx screws incl. screw anchors and washers are included in the original packaging.
/148 D24M Camera Manual: INSTALLATION 2.5.3 Overview: Procedure For All D24M Cameras Please be sure to install the camera in the following order: 1. Install and prepare the network connection 2. Drill the holes: Please use the enclosed screws and screw anchors whenever possible. It is essential that you use the supplied drilling template to ensure the precise alignment of holes for either the mounting ring of the D24M IT/Secure or the camera base of the D24M Basic (fold-out at the end of this manual). 3.
D24M Camera Manual: INSTALLATION 2.5.4 Procedure For D24M IT/Secure 1. Install and prepare the network connection 2. Install the flush-mounted socket:The pre-installed cable attached to the camera must be connected with the on-site network cable. For installation without accessories, a flush-mounted socket must be installed first to provide space for the connection. The cabling is now perfectly protected and cannot be seen or accessed from the outside.
/148 D24M Camera Manual: INSTALLATION 2.5.5 Procedure For D24M Basic 1. Unscrew the transparent dome of the camera in a counter-clockwise direction. To keep the dome clean, use the enclosed plastic foil or a lint-free cotton cloth. 2. Unplug the pre-installed network cable from the network connector inside the camera. Never touch electronic components as the static electricity may damage them! 3.
D24M Camera Manual: INSTALLATION 4. Remove the internal part of the camera with the lens mount from the base of the camera. 5. Position the base of the camera housing over the drilled holes and the prepared cable exit. Please make sure that the camera base is relatively flush with the surface. The network cable with connector should be flush with the ceiling or wall as a result.
/148 D24M Camera Manual: INSTALLATION 2.6 Mounting The Camera With The On-Wall Set 2.6.1 Mounting Instructions On-Wall Sets available in 0° and 10° inclinations allow the D24M to be installed quickly and easily on the wall or ceiling of a room. When using the set outdoors (IP65), ensure that the screw holes on the rear of the camera housing are sealed with the included foam rubber washers. It is not possible to install the On-Wall Set directly above a surface- or flush-mounted socket.
D24M Camera Manual: INSTALLATION 61/148 2.6.2 On-Wall Set The On-Wall Set must be ordered separately from the camera Item Quantity Part Name 2.1 1 On-Wall Set housing 2.2 4 Stainless steel Allen screws M4x35 mm 2.3 4 Stainless steel washers Ø 4.3 mm 2.4 4 Foam rubber washers 2.5 4 Lock screws with counter nuts 2.6 2 Cable fitting with counter nut and O-ring cord © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
/148 D24M Camera Manual: INSTALLATION Drilling Template On-Wall Set 0°-Set: 160 mm 74 mm 85 mm Find the drilling templates (scale 1:1) at the end of the manual as a fold-out 10°-Set: 166 mm © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
D24M Camera Manual: INSTALLATION Notes Use the fold-out template included at the end of the printed manual (valid for both 0° and 10° On-Wall Sets). Make sure that the drilling template is not scaled or adjusted to the paper size when printing the PDF file (enlarged or reduced). The maximum torque for all screws is 1 to 1.2 Nm. Scope Of Delivery And Required Parts Please first check that all components supplied with the On-Wall Set are present in the original packaging.
/148 D24M Camera Manual: INSTALLATION 2.6.3 Procedure 1. Attach washers: Prior to installation, stick a black foam rubber washer around each of the four screw holes on the rear side of the on-wall housing (remove the adhesive foil and press into place, surface must be clean and free of grease). This prevents water from entering the housing. 2. Prepare the cabling: Insert the seal into the cable opening of the On-Wall Set such that the black rubber seal is on the outside.
D24M Camera Manual: INSTALLATION 6. Remove the mounting ring: Separate the black mounting ring from the camera housing (lift the spring clip). This ring is not required when mounting the camera to the On-Wall Set. 7. Connect the cable: Connect the on-site network cable to the network cable passing through the On-Wall Set using a standard connector. Make sure to leave enough unused cable inside the housing. This will ensure that you can turn and tilt the lens mount freely later on.
/148 D24M Camera Manual: INSTALLATION 2.7 Mounting The Camera With The In-Ceiling Set The white decorative ring is also available in stainless steel 2.7.1 Mounting Instructions The In-Ceiling Set offers the most stylish installation option for the D24M. When properly installed, the only visible component is a particularly sleek and discreet dome camera, while most of the remaining components are concealed inside the ceiling.
D24M Camera Manual: INSTALLATION 67/148 2.7.2 In-Ceiling Set The In-Ceiling Set must be ordered separately from the camera Item Quantity Part Name 3.1 1 Ceiling mounting ring incl. 4 flat-head screws 3.2 1 Decoration ring 3.3 2 Wrench for In-Ceiling Mount 3.4 4 Clamps © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
/148 D24M Camera Manual: INSTALLATION D24M Drilling Template In-Ceiling Set Find the drilling templates (scale 1:1) at the end of the manual as a fold-out Clamping range 65 mm 6 to 22 mm ø 180 mm Notes Find the folded drilling template at the end of the manual. Make sure that the drilling template is not scaled or adjusted to the paper size when printing the PDF file (enlarged or reduced). © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
D24M Camera Manual: INSTALLATION Scope Of Delivery And Required Parts Please first check that all components supplied with the In-Ceiling Set are present in the original packaging.
/148 D24M Camera Manual: INSTALLATION 2.7.3 Procedure 1. Prepare the network connection: Run the network cable above the suspended ceiling and ensure that enough cable slack is available. 2. Cut a hole for installation: Cut a round hole for camera installation (e.g. with a 150 mm hole saw). Use the supplied cutting template of the In-Ceiling Set (fold-out at the end of the manual). 3.
D24M Camera Manual: INSTALLATION 71/148 7. Insert the camera and the In-Ceiling Set into the hole: Make sure that all winged cams are retracted before placing the In-Ceiling Set with the camera into the hole. Tightening the screws of the In-Ceiling Set extends the winged cams, thus firmly holding the set in place. The blue winged cams (see left) automatically secure the In-Ceiling Set in the ceiling when tightening the screws 8.
/148 D24M Camera Manual: INSTALLATION 2.8 Installing The Vandalism Set 2.8.1 Mounting Instructions The Vandalism Set provides additional security and protection for D24M cameras with little effort and at a low cost. It is ideally suited for use under particularly demanding conditions (such as prisons, trouble areas, train stations, etc.). The set consists of a robust stainless steel outer shell that is available in five different colors and a reinforced plastic dome.
/148 D24M Camera Manual: INSTALLATION 2.8.2 Scope Of Delivery And Required Parts Please first check that all the components supplied with the Vandalism Set are present in the original packaging. 5.3 5.5 5.1 5.2 5.4 Item Quantity Part Name 5.1 5.2 5.3 5.4 5.
/148 D24M Camera Manual: INSTALLATION Available Variants Of The MOBOTIX D24M Vandalism Outer Shell Polished stainless steel Matt stainless steel Silver-gray powder-coated stainless steel White powder-coated stainless steel Black powder-coated stainless steel The Following Additional Tools Are Required For Installation: • Allen wrench for removing the standard outer shell (included in the D24M packaging) • Screwdriver with bit receptacle for the two-hole driver bit © MOBOTIX AG • Security-Vision-Syst
D24M Camera Manual: INSTALLATION 2.8.3 Procedure • Remove the camera outer shell: Remove all four Allen screws using the supplied Allen wrench and lift off the outer shell. • Remove the standard dome: Unscrew the dome from the housing (counter-clockwise). Package and store the standard dome for possible use at a later time. • Aim and adjust the lens: When mounting the camera for the first time, please proceed to Section 2.11, Aiming And Adjusting The Lens.
/148 D24M Camera Manual: INSTALLATION • Insert the four spacers included in the Vandalism Set. • Now attach the stainless steel outer shell of the Vandalism Set using the safety screws. Tighten the screws into place using the supplied two-hole driver bit. © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
D24M Camera Manual: INSTALLATION Notes © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
/148 D24M Camera Manual: INSTALLATION 2.9 Installing The Wall Mount 2.9.1 Mounting Instructions The Wall Mount allows you to easily mount D24M cameras to walls or extensions, both indoors or outdoors. The camera remains IP65 weatherproof (dust-proof and resistant to water jets). The Wall Mount also covers RJ45 flush-mounted sockets and has ample space for additional modules (Mx2wire, WLAN, batteries, etc.).
/148 D24M Camera Manual: INSTALLATION 2.9.2 Wall Mount 5.8 5.4 5.6 5.1 5.3 5.2 5.7 5.5 Item Quantity Part Name 5.1 5.2 5.3 5.4 5.5 1 4 4 4 1 Wall Mount Stainless steel washers Ø 6.4 mm Universal screw anchors 8 mm Stainless steel Torx screws 6x50 mm Wall sealing 5.6 8 Stainless steel Allen screws M4x16 mm 5.7 5.8 8 1 Stainless steel washers Ø 4.3 mm Bottom plate © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
/148 D24M Camera Manual: INSTALLATION Drilling Template Wall Mount 50 12 Find the drilling templates (scale 1:1) at the end of the manual as a fold-out Direct installation over surface- and flushmounted sockets Height: 125 mm 120 Depth: 201 mm Width: 216 mm Notes Find the folded drilling template at the end of the manual. Make sure that the drilling template is not scaled or adjusted to the paper size when printing the PDF file (enlarged or reduced).
D24M Camera Manual: INSTALLATION Scope Of Delivery And Required Parts Please first check that all the components supplied with the Wall Mount Set are present in the original packaging.
/148 D24M Camera Manual: INSTALLATION 2.9.3 Procedure 1. Remove the camera mounting ring: Separate the black mounting ring from the camera housing. This ring is not required when mounting the camera to the Wall Mount. If the D24M was not in its original packaging, then it may be necessary to remove the outer shell with the four Allen screws beforehand. 2.
D24M Camera Manual: INSTALLATION 5. Mount the Wall Mount (without camera): Stick the black wall sealing to the back of the Wall Mount (remove the adhesive foil first, the surface must be clean and free of grease). Pass the network cable through the large square opening and into the Wall Mount. Use the included screws to install the Wall Mount (without the camera) at the intended position. Pass the network cable through the large square opening on back side of the Wall Mount. 6.
/148 D24M Camera Manual: INSTALLATION 2.10 Installing The Corner And Pole Mount 2.10.1 Mounting Instructions The 3 mm thick stainless steel Corner and Pole Mount is extremely robust and rust-proof. It is used (exclusively) in conjunction with the Wall Mount described in Section 2.9 in situations where you want to mount a D24M IT/Secure to a pole or wall corner. The Wall Mount required for complete installation must be ordered separately. The mounting pole should have a diameter of between 60 and 180 mm.
/148 D24M Camera Manual: INSTALLATION 2.10.2 Corner And Pole Mount Item Quantity Part Name 6.1 6.2 6.3 6.4 6.5 6.6 6.7 1 4 4 4 2 2 4 Height: 130 mm Pole Mount, stainless steel, white powder-coated Stainless steel Allen screws M6x20 mm Stainless steel washers Ø 6 mm Stainless steel lock nuts M6 Stainless steel straps Cable fitting with counter nut and O-ring cord Torx screws 6x80mm incl.
/148 D24M Camera Manual: INSTALLATION Scope Of Delivery And Required Parts Please first check that all the components supplied with the Corner and Pole Mount Set are present in the original packaging. The Following Additional Tools Are Required For Installation As A Pole Mount: • Screwdriver • Materials and tools needed to connect the pre-installed MOBOTIX network cable in the camera with the on-site network cable.
D24M Camera Manual: INSTALLATION 2.10.3 Mounting To A Pole Use the supplied stainless steel straps to affix the Corner and Pole Mount to a pole. • Guide the supplied stainless steel straps through the openings in the Corner and Pole Mount as shown in the diagram. Make sure that you are using the slots of the mount that best fit for the thickness of the pole. The stainless steel straps allow attaching the mount to poles with diameters between 60 and 180 mm.
/148 D24M Camera Manual: INSTALLATION 2.10.4 Mounting To A Wall Or Building Corner Use the supplied screw anchors, screws and washers to affix the Corner and Pole Mount to a building corner. • Mark the four screw anchor holes on the corner of the building, ensuring that the arrows on the mount point upwards. Drill the holes with a 10 mm wall drill.
D24M Camera Manual: INSTALLATION 2.10.5 Mounting The Wall Mount To The Corner And Pole Mount • Feed the network cables through the appropriate hole at the back of the Outdoor Wall Mount. The wall sealing on the Wall Mount must be in place already (see Section 2.9.3). • Use the 6 x 20 mm Allen screws, Ø 6 mm washers and M6 nuts included with the Corner and Pole Mount and attach the Wall Mount to the Corner and Pole Mount. • Then continue with the remaining work steps described in Section 2.9.
/148 D24M Camera Manual: INSTALLATION 2.11 Aiming And Adjusting The Lens Establishing A Connection To The Camera • Establish a connection to the camera as described in Section 3.2 First Images And The Most Important Settings. Aiming And Adjusting The Lens, Visual Inspection Make sure that you see the live image of the camera on the monitor of your computer or laptop. Now adjust the lens mount until you see the desired image area on your monitor: • Remove the camera dome.
D24M Camera Manual: INSTALLATION • Once the camera has been aimed, tighten the Allen screws at both sides of the lens mount (in a clockwise direction) and the toothed ring (in a clockwise direction) with the supplied hook wrench. Do not use excessive force when doing so as this may damage the camera. • Adjustment: Release the lock ring of the lens and adjust the image focus by rotating the lens in its socket. Check the image on the computer monitor.
/148 D24M Camera Manual: INSTALLATION 2.12 Replacing The MicroSD Card The camera must be taken down to remove, insert or replace a MicroSD card. To avoid data loss, be sure to deactivate MicroSD card recording in the camera software and reboot the MOBOTIX camera before removing the card. Caution A MicroSD card may only be removed from the camera after you have deactivated recording to a Flash device and rebooted the camera.
D24M Camera Manual: INSTALLATION 2.12.2 Inserting A MicroSD Card • Insert the MicroSD card: Push the MicroSD card into the card slot as shown, until an audible and perceptible click indicates it is in place. • Mount the dome of the camera. Use the supplied foil or a lint-free cotton cloth to insert the dome into its seat and turn it in a clockwise direction. • Attach the outer shell: Replace the outer shell and screw all four Allen screws tight using the supplied Allen wrench.
/148 D24M Camera Manual: INSTALLATION 2.13 Network And Power Connection 2.13.1 Notes On Cable Lengths And Power Supply • Power may only be supplied to the camera via its Ethernet connector. A MOBOTIX Power Adapter or similar high-quality PoE product is recommended to provide the power supply via the network cable (see Section 2.4 Available D24M Accessories): • one camera: with the Network Power Adapter (MX-NPA-PoE) • multiple cameras: with quality PoE products conforming to IEEE 802.
D24M Camera Manual: INSTALLATION The MOBOTIX factory default is Class 2. This default is usually fine and nothing needs to be changed. However, if the lower power level Class 1 is sufficient for your application, it may be advantageous – due to possible internal power distribution schemes amongst the ports of the PoE switch in use – to change the PoE power level class in the browser: 95/148 Variable PoE: multiple cameras can be operated simultaneously from the same switch 1.
/148 D24M Camera Manual: INSTALLATION 2.13.4 Power Supply When Connected Directly To A Computer The IP addresses in the diagram are shown only as an example 1. Connect the factory pre-installed cable of the camera to the Camera connector of the Network Power Adapter. 2. Connect the PC/Power connector of the Network Power Adapter to the Ethernet port of the computer. 3. Plug the RJ45 connector of the external power unit into the LAN/Power connector of the Network Power Adapter.
/148 D24M Camera Manual: INSTALLATION 2.13.6 Camera Startup Sequence As soon as the camera's power supply has been established, the two LEDs will show the progress of the startup sequence (see Section 5.4.3 LED Signals and LED Configuration in the Software Manual). • Startup sequence: Immediately after connecting the power supply, the red LED lights up, blinks for two seconds, then stays on permanently. The camera's boot loader checks the hardware, unpacks and starts the operating system.
/148 Download the MxEasy and MxControlCenter software for free at www.mobotix.com D24M User Manual: OPERATING THE CAMERA 3 OPERATING THE CAMERA 3.1 Manual And Automatic Operation - Overview MOBOTIX cameras do not require any extra software. Thus, you can set up and operate the MOBOTIX camera using a JavaScript-enabled browser on all common operating systems (such as Window, Linux, Macintosh, etc.). As an alternative, you can also use the MOBOTIX applications MxControlCenter and MxEasy.
Manual And Automatic Operation - Overview 3.1.1 99/148 Manually Using A Computer In The 10.x.x.x IP Address Range You can set up the camera's network parameters using a browser and the embedded camera software. To do this, connect the camera to a computer or a network that is using a 10.x.x.x IP address range (see Section 3.2.1 Manually Setting Up The Network Interface). Once this has been completed, you can enter the camera's default IP address in the browser address bar of the computer (see Section 3.
/148 D24M User Manual: OPERATING THE CAMERA 3.1.2 Automatically Using MxControlCenter Or MxEasy You can set up the camera's network parameters using the free of charge video management software MxControlCenter or MxEasy (see Sections 3.2.3 and 3.2.4). You can also use one of these applications to automatically configure the network parameters of MOBOTIX cameras that are not operating on the same IP address range as the computer. MxControlCenter software (free download from www.mobotix.
Manual And Automatic Operation - Overview 101/148 3.1.3 Automatically Using DHCP The camera can automatically obtain its network parameters using DHCP. This requires the network to have a functioning DHCP server (e.g. a DSL router with activated DHCP server) and the camera must be booted using DHCP (see Section 3.2.5 Starting the Camera With an Automatic IP Address (DHCP)).
/148 D24M User Manual: OPERATING THE CAMERA 3.2 First Images And The Most Important Settings Once the camera has been connected to the network, you need to set up the camera's network interface accordingly. This step involves setting up and checking the network parameters of the camera. If your network is already using an IP address in the 10.x.x.x range with a 255.0.0.0 network mask, you do not need to change the camera's network parameters. You can access the camera directly (see Section 3.2.2).
Manual And Automatic Operation - Overview 103/148 Linux/Unix: 1. Open a terminal as root user. 2. Enter the following command: ifconfig eth0:1 10.8.0.11 3. The computer is now also using the IP address 10.8.0.11 Mac OS X: 1. Open System Properties > Network. 2. Select Ethernet. In the Configuration field, select Manual and enter a 10.x.x.x IP address (e.g. 10.8.0.11). 3. Click Apply on the bottom right-hand side of the dialog to assign the computer the IP address 10.8.0.11. 2.
/148 D24M User Manual: OPERATING THE CAMERA 3.2.2 First Images And The Most Important Settings In The Browser Once the MOBOTIX camera has been connected to the power supply and to the network, you can access the user interface with the live camera image in the web browser. Internet Explorer, Firefox, Safari, Konqueror, Opera, Camino or any other graphical browser with activated JavaScript is suitable. It does not matter which operating system is used.
Manual And Automatic Operation - Overview 105/148 Camera Screens: Live, Player, MultiView The MOBOTIX camera automatically displays the live screen when it starts up (factory default setting). You can set a different start page in Admin Menu > Language and Start Page (e.g. the Guest screen) to allow a restricted access to the live image.
/148 D24M User Manual: OPERATING THE CAMERA 3.2.3 First Images And Network Parameter Configuration In MxControlCenter Download MxControlCenter for free from www. mobotix.com Installation If you have a MxControlCenter installation CD, insert it into the CD/DVD drive of your computer. If you do not have the installation CD or just want to install an update, you can download the latest Windows installer from the MOBOTIX website as an MSI file and install it manually.
/148 Manual And Automatic Operation - Overview MOBOTIXSearching and Displaying MOBOTIX Cameras Launch MxControlCenter after successful installation (see section Installation) by doubleclicking the shortcut that was created by the Installer or the executable MxCC.exe file in the installation directory on your computer. When MxControlCenter is launched for the first time, the Add Cameras: Search and Select dialog opens and the application automatically searches for MOBOTIX cameras in the local network.
/148 D24M User Manual: OPERATING THE CAMERA Cameras Are Found But Are Located In A Different Subnet The symbols in the first column and the legend in the dialog indicate whether you can access a particular camera directly from the MxControlCenter, which is the case for all (OK) . Cameras designated with (different subnet) are cameras designated with located in a different subnet. This usually applies to new cameras or cameras that have been reset to their factory settings.
Manual And Automatic Operation - Overview Reconfiguring Cameras In A Different Subnet In most networks, a DHCP server will automatically assign the IP addresses for network devices so that you can apply the default settings in the Configure camera dialog (Get IP address automatically). If you would like all cameras to obtain IP addresses automatically, select the Apply to all selected cameras checkbox.
/148 D24M User Manual: OPERATING THE CAMERA Camera Preview If you select one camera with the status OK, MxControlCenter automatically displays the live images from that camera in the preview window. If you are using [Ctrl]-click to select additional cameras, the image from the camera selected last is shown in the preview window. This feature makes it easier for you to identify the cameras you that would like to use.
Manual And Automatic Operation - Overview 111/148 3.2.4 First Images And Network Parameter Configuration In MxEasy Download MxEasy for free from www. mobotix.com Installing MxEasy If you have an MxEasy installation CD, insert it into your CD/DVD drive. The assistant will guide you through the installation process. If this is not the case or if you would like to update to a newer version, you can download the latest MxEasy version for your operating system from the MOBOTIX website (www.mobotix.
/148 D24M User Manual: OPERATING THE CAMERA have an unknown password or for which no user name/password combination has been specified in MxEasy will be displayed in a different color. If all the desired MOBOTIX cameras are highlighted as Accessible in the video source list, you can proceed to the Selecting Cameras section below. Cameras with the status Invalid Network can be reconfigured for the "proper" subnet, as described in the following section.
Manual And Automatic Operation - Overview If you have assigned a fixed IP address to your computer, you will probably want to assign fixed IP addresses (issued by your system administrator) to every camera (the Use this IP address option). Here, for the most part, you should either enter a similar configuration as in the network settings of your computer. Once you click OK, the selected cameras will be reconfigured automatically.
/148 D24M User Manual: OPERATING THE CAMERA Using The Selected Cameras Clicking OK prompts MxEasy to use the selected cameras and to generate a screen with the live images of the four cameras that you selected first. "Add cameras" button (marked red) Last event image (marked red) The panel at the bottom right-hand corner always displays the most recent event image of whatever camera is visible in the large panel.
Manual And Automatic Operation - Overview 115/148 3.2.5 Starting The Camera With An Automatic IP Address (DHCP) If your network has a DHCP server, you can start the MOBOTIX camera with DHCP support. In this case, the DHCP server automatically assigns an IP address. Once startup has been completed, the camera automatically announces its IP address, its network mask and its MAC address.
/148 D24M User Manual: OPERATING THE CAMERA 3.2.6 Starting The Camera With The Factory IP Address Under certain circumstances, you may have to reset the camera to its factory IP address. This could be the case, for example, if the IP address has been lost or the camera does not respond to the last known IP address. 1. If the camera is running, disconnect the camera's power supply. 2. Reconnect the power supply of the camera. 3. Wait until both LEDs light up simultaneously for the first time. 4.
Manual And Automatic Operation - Overview Notes: © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
/148 D24M User Manual: OPERATING THE CAMERA 3.3 Virtual PTZ The virtual PTZ function allows you to use a mouse or joystick to continuously zoom in on images from the selected video source and "virtually" move the enlarged image section within the entire image sensor area. USB joystick offers greater ease of use Operation Using The Mouse And Scroll Wheel The vPTZ function of the D24M can be controlled in the browser using the mouse.
Manual And Automatic Operation - Overview Operation Using USB Joystick A standard USB joystick can drastically facilitate vPTZ operation for the user – in the browser, in MxEasy and in the MxControlCenter (however, MxCC is also equipped with a virtual joystick that can be operated using the mouse). Please first install the joystick on the PC according to the manufacturer's instructions.
/148 D24M User Manual: OPERATING THE CAMERA 3.4 Correction Of Lens Distortion (L22 Only) If you are using a D24M with the L22 90° wide-angle lens, the image, particularly the edges, may be slightly distorted due to the extreme angle of the lens. You can suppress this effect using software (e.g. in the browser) so that a new and appropriately corrected image can be displayed live. A side effect of this correction, however, is that a cushion shape appears around the edges of the image.
/148 Correction Of Lens Distortion (L22 Only) Since activated lens distortion correction requires additional processing power, you should consider disabling it in situations where it is not really necessary. You will only notice a minimal distortion of the image, especially if you use the zoom. However, the maximum frames rate for high resolution may be reduced, which means you have to choose between maximum distortion correction or maximum frame rate.
/148 D24M User Manual: OPERATING THE CAMERA 3.5 MicroSD Card Recording 3.5.1 Introduction Flash memory devices: More reliable than hard disks. Flash-based storage devices (MicroSD cards, CF cards, USB sticks and solid-state disks) do not contain any moving parts as compared to the commonly used hard disks. Flash-based devices are compact, extremely resistant to humidity and shock, use very little energy, do not lose data during power failures and are becoming less expensive.
/148 MicroSD Card Recording 32 GB MicroSD Card: Storage Requirements and Life Expectancy 6 fps CIF 6 fps VGA 1 fps Mega 1 fps QXGA M-JPEG M-JPEG MxPEG M-JPEG M-JPEG File size single image 15 kB 45 kB - 120 kB 240 kB Storage req. per second 90 kB 270 kB 75 kB 120 kB 240 kB Storage req. per 24 hrs 7.8 GB 23.5 GB 6.5 GB 10.4 GB 20.8 GB Time for one full cycle 4 days 1.3 days 4.8 days 3 days 1.5 days Est. theor.
/148 D24M User Manual: OPERATING THE CAMERA 3.5.2 Formatting The Card Formatting the card: Admin Menu > Storage on External File Server / Flash Device Before a MOBOTIX camera can store image and video sequences on a MicroSD card, it needs to be formatted as MxFFS (MicroSD cards delivered with MOBOTIX cameras are already MxFFS-formatted). The following steps are necessary to format a storage device (Admin Menu > Storage on External File Server / Flash Device): 1.
MicroSD Card Recording 125/148 3.5.3 Activate Recording Follow these steps to activate the recording to a MicroSD card that has already been MxFFS-formatted (Admin Menu > Storage on External File Server / Flash Device): 1. Make sure that there is a MicroSD card in the card slot of the MOBOTIX camera. Activating the storage device: Admin Menu > Storage on External File Server / Flash Device 2. Make sure that the MicroSD card has been MxFFS-formatted (see Section 3.4.2 Formatting the Card). 3.
/148 D24M User Manual: OPERATING THE CAMERA 3.5.4 Accessing Camera Data The following options facilitate access to the stored image and video sequences on a MicroSD card: • In the web browser: Play back the recorded event images without audio directly from the MicroSD card using the Playback view of the camera software. • In MxEasy: Play back the recorded video sequences with audio by accessing the MicroSD card in the MOBOTIX camera via the camera.
/148 MicroSD Card Recording Caution A MicroSD card may only be removed from the camera after you have deactivated Recording to MicroSD Card and rebooted the camera. Failing to do so may lead to data loss! Removing connected Flash storage devices from the camera without properly deactivating them may lead to data loss and/or destroy certain areas of the storage device. Due to MxFFS formatting, this is limited to 4 MB of lost data per incident. 3.5.
/148 D24M User Manual: OPERATING THE CAMERA 3.6 Full Image Storage It is possible to store a full image, regardless of the live image stream that is being displayed. This ensures that the recording always contains the full image of the lens used, even though the operator may have used the vPTZ features to zoom into the image in order to examine a specific detail.
/148 MicroSD Card Recording Activate/Deactivate Full Image Storage In The Browser To configure this feature, open the Setup Menu > Event Control > Recording dialog and activate or deactivate the "Full Image Recording" option. Notes Post-event search in the full image: If you are using Full Image Recording on D24M cameras, you should use at least MEGA resolution when storing. This will facilitate later searches in MxControlCenter or MxEasy.
/148 D24M User Manual: OPERATING THE CAMERA 3.7 Configuration In The Browser 3.7.1 Overview A MOBOTIX camera can be completely configured using a JavaScript-enabled browser on all common operating system (such as Windows, Linux, Macintosh, etc.). The camera provides a HTML-based user interface for this purpose. The camera executes the changes you make to the camera configuration via HTTP commands using programs and scripts of the embedded software. The settings are stored in the camera's Flash memory.
Configuration In The Browser • Disable public access: Guest users are only allowed to access the Guest screen of the camera without entering a password. If this is not desired, you should deactivate public access (Quick Installation or Admin Menu > Users and Passwords). => (Software Camera Manual Part 2, Section 5.4.
/148 D24M User Manual: OPERATING THE CAMERA • Activate event control and recording: By factory default, the MOBOTIX camera's event control is disabled. Click the Arm & Record button to activate event control. This will activate video motion detection and recording. Cameras with integrated Flash memory (MOBOTIX R models and models with SD card) will use the Flash memory by default to store the image and video data (recording target).
Configuration In The Browser 133/148 3.7.3 Additional Configuration Options • Administering the camera: You can modify the camera configuration in the Administration menu or the Setup menu. User Name: admin Password: meinsm • Admin Menu: This menu contains the basic configuration dialogs of the camera (e.g. passwords, interfaces, software update). • Setup Menu: This menu contains the dialogs for configuring the image, event and recording parameters.
/148 D24M User Manual: OPERATING THE CAMERA 3.8 Additional Notes 3.8.1 Weatherproof Qualities The MOBOTIX D24M IT/Secure models have been certified weatherproof according to IP65 (absolutely dust-proof and resistant to water jets) and can also be wall-mounted outdoors. The MOBOTIX D24M Basic has attained a protection class of IP54. 3.8.2 Password For The Administration Menu Accessing the administration menu of the camera (Admin Menu button) is only possible after entering a user name and password.
Additional Notes 135/148 Note: All defined users will be deleted and the admin password will be reset to the factory default when you reset the camera using Admin Menu > Reset. If you want to maintain existing users, use the method described in Section 3.2.6 Starting the Camera with the Factory IP Address. 3.8.5 Activate Event Control And Motion Detection In its default configuration, the camera's event control and video motion detection features are not enabled.
/148 D24M User Manual: OPERATING THE CAMERA 3.8.8 Browser Current Internet browsers (Internet Explorer, Netscape, Mozilla Firefox, Safari, Konqueror, Opera, …) with enabled JavaScript can display the camera's live images with their standard settings. Text-based browsers (e.g. lynx) cannot display the user interface and are not suitable for operating the camera. Section 4.1.3 Browser Settings in the Camera Software Manual contains more detailed information on possible browser problems. 3.8.
Additional Notes 3.8.11 Additional Information For more information, see the News and Functional Overview pages in the online help of the camera's browser interface. Click the symbol to open the camera's help section. Furthermore, detailed information on the camera and its current configuration is displayed in the Camera Status dialog. Click the symbol to open the relevant page. © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
/148 D24M Camera Manual: MOBOTIX Glossary MOBOTIX Glossary ActiveX Control element on Windows computers which may also be used in other programs (including Windows Internet Explorer) to run special tasks. The MxPEG ActiveX control element allows video and audio data from MOBOTIX cameras to be displayed in other applications (including Internet Explorer). Arming This refers to the process of activating an alarm system so that events trigger the appropriate alarms.
/148 DevKit Camera installation kit with independent image sensors based on MOBOTIX M12D or M22M, intended for concealed installation in other devices. DHCP Abbreviation for Dynamic Host Configuration Protocol. Allows a server to automatically assign devices in the network with the appropriate configuration (including the IP address, DNS server and gateway), as opposed to fixed IP addresses on the individual network devices. DNS Abbreviation for Domain Name Service.
/148 D24M Camera Manual: MOBOTIX Glossary ExtIO MOBOTIX signal module that the camera uses to directly operate lamps, sirens and door openers, as well as external audio components (speakers and microphones). Fixdome Camera without moving parts in a dome-shaped housing. Flash Memory See CF Card. fps Abbreviation for frames per second. See Frame Rate. Frame rate The frame rate specifies how many frames per second (fps) are generated and sent by the camera.
/148 from network cameras, the layout determines the positions and resolutions of the images displayed on the monitor. In addition to the actual video images, you can also incorporate graphic elements such as the location of the cameras, etc. LED Abbreviation for Light Emitting Diode. An electronic semiconductor component built into MOBOTIX cameras and add-on modules that emits light when a current flows through the component in the correct direction. Linux Free and open source operating system.
/148 D24M Camera Manual: MOBOTIX Glossary NAS Abbreviation for Network Attached Storage, a storage system connected via an Ethernet cable. All network devices (cameras) have access to this storage system. Network A group of computers that are connected via various cables and share access to data and devices such as printers and IP cameras. PIR Passive Infrared Sensor for motion detection. PoE Power over Ethernet. A technology for supplying network-enabled devices (e.g.
/148 Signal Input/Signal Output Coupling a system that triggers an alarm (for example, a fire alarm system or a network camera) to a control center or another type of transmitter (for example, a telephone or IP network). A typical signal input/output scenario in video surveillance progresses as follows: an event triggers an alarm. This alarm then display the video image from the network camera that triggered the alarm on the monitor at a control center.
/148 D24M Camera Manual: Notes © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
Notes © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
/148 D24M Camera Manual: Declaration Of Conformity Konformitätserklärung Declaration of Conformity Déclaration de conformité Hersteller: MOBOTIX AG Manufacturer: Fabricant : Produkt: Netzwerk-Kamera Product: Network camera Produit : Caméra de réseau Typ: D24M Type: Type : Bei bestimmungsgemäßer Verwendung erfüllt das bezeichnete Produkt die Bestimmungen der im Folgenden aufgeführten Richtlinien: The product identified above complies with the essential requirements of the relevant standard,
MOBOTIX – The HiRes Video Company To demonstrate our confidence in the quality of our products, MOBOTIX cameras were used to capture all the images that appear in this manual. Manufacturer Executive Board MOBOTIX AG Dr. Ralf Hinkel Kaiserstrasse D-67722 Langmeil Registration Office: Kaiserslautern Local Court Germany Registration Number: HRB 3724 Tel : +49 6302 9816-103 Tax Code: 44/676/0700/4 Fax: +49 6302 9816-190 Tax Office: Worms-Kirchheimbolanden, Germany http://www.mobotix.
EN D24M: Camera Manual The HiRes Video Company HiRes 3 Megapixel 2048 x 1536 Software zoom EN Skyline Format free Each image format freely definable 30 Frames/s VGA (640 x 480) 30 F/s Mega Virtual PTZ Digital pan, tilt, zoom Backlight Safe using CMOS without mechanical iris Internal DVR Fits In. Watches Out. Internal via Flash, external via Network The D24M MonoDome camera adapts perfectly to any task.
