User manual

108/148
D24M User Manual: OPERATING THE CAMERA
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
Cameras Are Found But Are Located In A Dierent Subnet
The symbols in the first column and the legend in the dialog indicate whether you can
access a particular camera directly from the MxControlCenter, which is the case for all
cameras designated with
(OK) . Cameras designated with (dierent subnet) are
located in a dierent subnet. This usually applies to new cameras or cameras that have
been reset to their factory settings.
Note
The MxControlCenter finds all MOBOTIX cameras, even when the computer and the
cameras are not located in the same subnet.
Select the cameras that you would like to display in a Layout (a view with cameras) and
click Add selected video sources.
The Create new layout? dialog will appear. You can choose to either create a new layout
with the cameras that have been found or simply add those cameras to the MxControlCenter.
If some of the selected cameras are in dierent subnets, MxControlCenter displays the
following dialog:
Click Yes to reconfigure the cameras for your specific network area.