User manual

34/148
D24M Camera Manual: INSTALLATION
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
2 INSTALLATION
Although the D24M is primarily designed for installation on walls and ceilings, it can also
be mounted to a pole or the corner of a building, for example, using the appropriate
MOBOTIX accessories. The dierent installation options are described in sections 2.4 and
below, while the drilling templates can be found at the end of the manual.
2.1 Preparing The Installation
Before installing the MOBOTIX D24M, the following questions should be answered:
1. Where will the camera be mounted?
Mounting to a ceiling or wall, see Section 2.1.1
2. Which other mounting options are available?
On-wall mounting, in-ceiling mounting, vandalism protection, wall mounting, pole
mounting, see Section 2.1.2
3. How is the camera connected to the network and how is the power supplied?
MX-NPA-PoE or other PoE components (IEEE 802.3af), see Section 2.1.3
4. How are the connections furnished from the building?
Sockets, see Section 2.1.4
5. What cabling considerations are necessary?
Wiring, see Sections 2.1.5 and 2.13
The following sections contain a brief answer to each of these questions, as well as refer-
ences to the relevant sections in this manual. For more information on the MOBOTIX D24M
and available accessories, please see: www.mobotix.com.