User manual

55/148
D24M Camera Manual: INSTALLATION
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
2.5.2 Required Tools
Please first check that all the components supplied with the camera are present in the
original packaging (see Section 2.2 or 2.3).
The Following Additional Tools Are Required For Installation:
• Any additional materials for fastening the camera to a ceiling/wall, if necessary – 4
Torx screws incl. screw anchors and washers are included in the original packaging.
• Screwdriver
• Power drill for screw anchor holes needed for ceiling/wall mounting
• MOBOTIX drilling templates (at the end of this manual)
• Scissors to cut out the template
• Pen to mark the drill holes
•
Materials and any tools needed to connect the pre-installed MOBOTIX network cable
in the camera with the on-site network cable.