User manual

2.14.1 Mounting to a Wooden Wall or Surface
Use the supplied materials and suitable tools for mounting the SecureFlex mount to
a wooden wall or surface. Follow the Mounting Instructions below to complete the
installation.
Use the supplied wood screws without dowels, if
you are mounting the camera to a thick wooden
wall or structure. If the wooden wall or surface is too
thin or if concrete or brick is behind the wood, you
should also use the supplied dowels for mounting.
Make sure that you know how thick the wooden
wall or surface is, before you start drilling the holes.
Please also follow the instructions in the following
sections.
Required Materials:
• 4 hex head screws (Pos.6)
• 4 washers (Pos.5)
Required Tools:
• Wrench or ratchet for M6 hex heads
• Allen wrench 5mm (item3)
• Possibly power drill and drill bit for pre-drilling
Mounting Instructions:
• Slide a washer (item5) over every hex head screw (item6).
• Press the SecureFlex mount against the wooden wall or surface.
• Insert the four screws (with washers) into the openings in the foot of the
SecureFlex mount.
• Tighten the screws using the wrench or ratchet.
• Check the screws for proper tightness and push the caps onto the hex
heads.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
44/92
M12 Camera Manual Part 1