User manual

3.3.3 Ethernet: Power Supply Using PoE Products (Power over Ethernet)
• Connect the 10BaseT/NET connector of the camera to the Ethernet con-
nector of the switch/router. The network components need to support the
PoE standard IEEE 802.3af.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
58/92
M12 Camera Manual Part 1
PoE components without
fans increase overall reli-
ability of the entire sys-
tem
Note
If you are using IEEE 802.3af Power over Ethernet network compo-
nents for supplying power to MOBOTIX cameras, make sure that these
components do not have a fan. Since the power consumption of MO-
BOTIX cameras is very low compared to other products, this increases
the reliability of the entire system and expands the life cycle of these
components.
PoE IEEE 802.3af!