User manual

Mx2wire+ User Manual: OPERATION
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
38/44
3.3 LED Signaling: Operating Statuses And Error Messages
Each Mx2wire+ unit has two LEDs (green and orange), which provide information on the
current functional status of the PoE power supply and the data trac. The LEDs can either
light up continuously (ON) or they can blink (BLINK).
Two-wire cable
Sender
Receiver
LED 1 LED 1LED 2 LED 2
PoE switch/injector
IEEE 802.3af/at
End device (camera/PC)
LED 1 – Sender LED 2 – Sender LED 1 – Receiver LED 2 – Receiver
ON ON ON ON
Power is supplied
to the Mx2wire+
unit from the
switch (PoE)
Network
connection to the
switch (PoE) has
been established
Power is supplied
to the Mx2wire+
unit via the two-
wire cable
Network
connection to the
camera has been
established
BLINK BLINK BLINK BLINK
Camera is
receiving power (is
connected)
Data trac
present
never Data is transferred
to the receiver
Overview: Operating Statuses 1 To 4
LED 1 – Sender LED 2 – Sender LED 1 – Receiver LED 2 – Receiver
1 BLINK ON ON ON
2 ON ON ON ON
3 BLINK BLINK ON BLINK
4 ON BLINK ON BLINK
1. Mx2wire+ and the end device (camera) both receive sucient power from the
PoE switch (green LEDs). A data connection from the end device to the PoE switch
is established (orange LEDs), however, no data is currently being transferred. The
blinking of the green LED (only) on the sender indicates that another PoE end
device (camera) is being supplied with power in addition to Mx2wire+.
LED 1 green
(power)
LED 2 orange
(data)
The sender is the
Mx2wire+ unit that
receives power from
the switch, as data
is transferred in
both directions