Datasheet

www.mobotix.com
22
T24
Fast, Simple Installation
In new constructions, MOBOTIX recommends connecting a CAT7 cable directly to the
Door Station. In renovations or in older buildings, the existing bell wires can be used
further together with MOBOTIX two-wire technology.
Ideal For Renovating/Old Buildings: MOBOTIX Two-Wire Technology
Are you unable or unwilling to lay a network cable to your front door? No problem, since
the two-wire network module available in the modular T24 system (T24-Info2wire+),
which can replace the simple info module of the Door Station in the form of an illuminated
door sign, supplies power to the IP Video Door Station and establishes the network
connection via two standard bell wires.
The existing doorbell or simple door intercom system can be replaced by a versatile
MOBOTIX access control system with a high-resolution door camera with little extra
eort or cost. This way, the station can be integrated in any older building, either as
an on-wall or in-wall version. In most cases, there is no need for the time-consuming
and costly process of drilling and laying additional cables.
Automatic Operation At The Push Of A Button
Once the Door Station is installed and connected, it is ready for operation within just
a few minutes. The entire T24 system was designed by MOBOTIX to allow it to be
started up quickly and easily by a single user. You can start up and configure the
entire system without the need for a PC, any other special devices or prior detailed
knowledge of networks.
Ideal For Renovating/Old Buildings: MOBOTIX Two-
W
Are you unable or unwilling to lay a network cable to your front door? No problem, since
the two-wire network module available in the modular T24 system (T24-Info2wire+),
which can replace the simple info module of the Door Station in the form of an illuminated
door sign, supplies power to the IP Video Door Station and establishes the network
connection via two standard bell wires.
The existing doorbell or simple door intercom system can be replaced by a versatile
MOBOTIX access control system with a high-resolution door camera with little extra
eort or cost.
This way, the station can be integrated in any older building, either as
an on-wall or in-wall version. In most cases, there is no need for the time-consuming
and costly process of drilling and laying additional cables.
Automatic Operation At The Push Of A Button
Once the Door Station is installed and connected, it is ready for operation within just
a few minutes. The entire T24 system was designed by MOBOTIX to allow it to be
started up quickly and easily by a single user
. You can start up and configure the
entire system without the need for a PC, any other special devices or prior detailed
knowledge of networks.
User-Friendly Complete Solution
Info2wire+
Indoor module
Two-wire cable
Data and power
PoE switch/injector
IEEE 802.3at
Data and power
Info2wire+
Outdoor module
Two-