User manual

2.11 Mounting the MOBOTIX M12 to a Wall or Ceiling

The foot of the SecureFlex mount is large enough to completely cover a wall

outlet (see section 2.12,

Preparing the Installation

2.11.1 Mounting to a Wall

Before attempting to mount the camera,

make sure that you have found the best

camera position. It is important that the

camera's field of view is not obstructed in

any way.

Once the camera has been mounted to the

wall, you can fine-tune its position. Using

the SecureFlex mount, the camera can be

tilted horizontally and vertically.

2.11.2 Mounting to a Ceiling

Before attempting to mount the camera to a

ceiling, make sure that you have found the

best camera position. It is important that the

camera's field of view is not obstructed in

any way.

Once the camera has been mounted to the

ceiling, you can fine-tune its position. Using

the SecureFlex mount, the camera can be

tilted horizontally and vertically.

www.mobotix.com • sales@mobotix.com

38/92

M12 Camera Manual Part 1

The mount covers RJ45

wall outlets and complete-

ly conceals the cabling

When mounted to a wall,

the camera can be tur-

ned/tilted as follows:

When mounted to a cei-

ling, the camera can be

turned/tilted as follows:

Caution

Never use screws with countersunk heads to fasten the mount, as

these screws will destroy the mount.

• horizontally: approx. 180°

• vertically: approx. 70°

• horizontally: approx. 360°

• vertically: approx 90°