Specifications
113/136
Virtual PTZ and Full Image Recording
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Functions of the M25M OnScreen Control
To use the OnScreen Control, click on the arrows in the top area for shifting the image
section. In the bottom areas, which are displayed when needed, click to the left and/or
right of the center point.
The same applies for every area: The further away that you click from an area’s center
point, the greater the change triggered. To reset an area, click on its center point again.
During panorama correction, clicking between the two trapezoid symbols straightens the
left or right tilting lines, which are best visible at the edges of the image section.
Image tilt correction
Panorama correction
Zoom
Tilt down
Pan to the right
Tilt up
Default setting
Close
Pan to the left
Depending on the mount-
ing position (ceiling,
wall, oor), panorama
correction and mount-
ing error correction
may not be available!
Bring columns together
at the top (neces-
sary to correct the
example on the left)
Bring columns together
at the bottom