Specifications

128/136
M25M Camera Manual: Operating the Camera
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
Depending on the later tilt of the camera, drill through the front or rear drain hole of the
camera’s weatherproof housing.
When cleaning the camera with a water jet, do not use high-pressure cleaners. The drain
holes should be sealed with adhesive tape during cleaning.
3.6.2 Password for the Admin Menu
Accessing the Administration Menu of the camera (Admin Menu softbutton) is only pos-
sible after entering a user name and password.
• Factory default user name is admin.
• Factory default password is meinsm.
The Quick Installation assistant automatically appears when the Administration Menu is
accessed for the first time. It provides an easy method to adjust the basic camera settings
to the current application scenario. For security reasons, we highly recommend chang
-
ing the default administrator password after the camera has been properly configured.
Enter the user name and password exactly as shown above. Note that all entries are
case-sensitive.
Caution
Make sure that you store information on user names and passwords in a secure
place. If you lose the administrator password and cannot access the administration
menu, the password can only be reset at the factory. This service is subject to a fee!
TILT (UP)
TILT (DOWN)
Camera tilted
upwards: Drill through
rear drain hole
Camera tilted down-
wards: Drill through
front drain hole