Q2 2M The HiRes Video Company I th wi nt mou iling e n-C Allround Easy. Allround Secure. MOBOTIX' ultra-compact, weatherproof IP Dome camera is so inconspicuous that many do not recognize it to be a camera. Thanks to its 360° allround view, the camera can monitor and record, event-driven, an entire room. Full Image Image Correction Virtual PTZ Features Powerful performance in complete video solutions ...
Q22M Camera Manual Part 1 MOBOTIX Camera Data Enter the data of your camera here! Camera Model: Camera Name: Factory IP Address: . . . Current IP Address: . . . activated DHCP: deactivated Admin User Name: Admin Password: Note: MOBOTIX offers inexpensive seminars that include a workshop and practical excercises: Basic Seminar 3 days, Advanced Seminar 2 days. For more information, see www.mobotix.com © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.
1/112 Q22M Camera Manual Part 1 Q22M CAMERA MANUAL PART 1 1 INTRODUCTION 8 1.1 Lens Options, Hardware and Software Features 18 1.2 The MOBOTIX Concept 22 2 MOUNTING 28 2.1 2.1.1 2.1.2 2.1.3 2.1.4 2.1.5 2.1.6 Preparing the Installation Mounting to a Ceiling or Wall Mounting Options Hints for Choosing a Good Mounting Position Network Connection and Power Supply, UPS Providing the Camera Connections, Wall Outlets Directions for Mounting 28 28 29 30 32 34 35 2.2 2.2.1 2.2.2 2.2.
2/112 Q22M Camera Manual Part 1 3 OPERATING THE CAMERA 70 3.1 3.1.1 3.1.2 3.1.3 Overview Connecting the Camera to the Network and to the Power Supply Setting up the Network Interface of the Camera and the First Image Configuring the MOBOTIX Q22M 70 70 71 73 3.2 3.2.1 3.2.2 3.2.3 3.2.4 3.2.
Q22M Camera Manual Part 1 APPENDIX: IP65 CERTIFICATE, DECLARATION OF CONFORMITY DRILLING TEMPLATES Note Chapters 4 and above are part of the Camera Software Manual (Software Manual in short). The main headings are listed below to give you an overview of the Software Manual contents. SOFTWARE MANUAL PART 2 4 CAMERA USER INTERFACE 4.1 The First Image in the Browser 4.2 The First Image in MxControlCenter 4.3 The Live Screen in the Browser 4.4 The Playback Screen in the Browser 4.
4/112 Q22M Camera Manual Part 1 6.1 Overview 6.2 Preparatory Steps 6.3 Updating the Camera Software 6.4 Update Checklist 7 EVENTS, ACTIONS AND MESSAGES 7.1 Overview 7.2 Functional Overview 7.3 General Procedure 7.4 Screen Display of Event Settings in Live Image 7.5 Arming 7.6 Events 7.7 Actions and Messaging, Action and Messaging Profiles 7.8 Working with Profiles 7.9 Time Tasks 8 RECORDING 8.1 Overview 8.2 Recording Modes 8.3 Recording Types 9 TELEPHONY FEATURES 9.
Q22M Camera Manual Part 1 10 5/112 MOBOTIX CAMERAS ON THE WEB 10.1 Overview 10.2 Indirectly Accessing MOBOTIX Cameras via the Web 10.3 Directly Accessing MOBOTIX Cameras via the Web 10.4 Configuring the Router 10.5 DynDNS 11 SOFTWARE INTERFACES 11.1 Overview 11.2 Accessing the Camera's Live Image and the Event Images 11.3 Accessing the Camera's Live Image Using the Second Image Channel 11.4 Video Streaming 11.5 The HTTP API Note Download the latest version of this document as a PDF file from www.
6/112 Q22M Camera Manual Part 1 MOBOTIX Cost Benefits Overview—MOBOTIX Cost Benefits Increased resolution reduces amount of cameras 1536-line, high-resolution sensors give a better overview and allow monitoring an entire room with just one camera from the corner Reduced installation costs at any distance Standard Ethernet connection enables the use of common network components such as fiber, copper and wireless (WiFi) Intelligent recording technology reduces storage Decentralized recording technology i
Q22M Camera Manual Part 1 7/112 MOBOTIX Technical Advantages Progressive-scan instead of half-frame blur Megapixel sensor and image processing inside the camera with digital white balance generates sharp and true color images at every scale Sun and backlight compensation CMOS sensor without auto iris, digital contrast enhancement and configurable exposure measurement zones guarantee optimum exposure control Dual camera technology: 2-in-1 Two possible camera views with picture-in-picture technology or 18
8/112 Q22M Camera Manual Part 1 1 INTRODUCTION Congratulations on your decision to purchase an extraordinarily elegant and discreet network camera "Made in Germany"! Like all other MOBOTIX cameras, the Q22M uses a high-resolution color image sensor with 3.1 megapixels and brings you prime quality combined with convincing features.
9/112 Q22M Camera Manual Part 1 vPTZ: Virtual Pan/Tilt/Zoom Features The virtual PTZ features (vPTZ) are already part of the integrated Q22M camera software. This means that you can continuously zoom into or out of the live image and move to any position in the image directly in the browser using either the mouse wheel or a joystick. The optional PTZ control panel allows using the zoom and pan/tilt features in a similar manner.
10/112 Q22M Camera Manual Part 1 rections North, East, South and West, thus covering the entire room in one image. The preset North position can be moved to any direction in the image; the camera generates the three other directions automatically and stores them as separate views. Simultaneous Corrected Live Image and Full Image Recording All commonly used PTZ cameras only store the image that is currently viewed in the live image (live image recording).
Q22M Camera Manual Part 1 Storing and Loading of Predefined Views In order to facilitate the work of the users, the Q22M can store a total of 256 views (virtual camera direction and zoom setting) including the North, East, South and West standard views that can be loaded again using joystick keys or softbuttons. Automatic Camera Movements Besides being able to manually move the virtual camera to specific positions and zoom settings, the camera can also "move" automatically.
12/112 Q22M Camera Manual Part 1 Camera Design Creates New Applications Some applications scenarios benefit from a surveillance camera that is present, but without attracting attention. The low-key, elegant appearance of the camera, especially when installed with the In-Ceiling set, makes the Q22M an optimum solution where decent design and an inconspicuous look are important. Take hotels and restaurants, for example, but also installations in public buildings, waiting rooms and showrooms.
Q22M Camera Manual Part 1 13/112 Since the Q22M is just as robust, weatherproof and maintenance-free as all other MOBOTIX cameras (Q22M-Secure attains IP65), it can be used without limitations in all mobile and fixed installations, including outdoor applications. Mobile Q22M application in a bus: Full image (QXGA, uncorrected) of the rear exit Corrected VGA live image of the same camera, panned and zoomed © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
14/112 *The Q22M with L22 90° lens will be available at a later point in time Q22M Camera Manual Part 1 Model Versions The Q22M is available as Secure and Basic models, which come with different feature sets. Both models can also be ordered with an L22 Super Wide-Angle lens* with a horizontal image angle of 90°.
Q22M Camera Manual Part 1 15/112 The new MxEasy is the multi-platform software for Windows, Macintosh and Linux systems, which provides for easy operation of the MOBOTIX system thanks to its intuitive user interface, thus creating a new user experience when viewing and controlling MOBOTIX cameras.
16/112 Q22M Camera Manual Part 1 Vandalism Set (MX-Q22-OPT-VANDAL-...) Vandalism set with mini dome (IP65, suitable for outdoor applications) The Vandalism set reliably protects the Q22M against mechanical impact. The set consists of a robust stainless steel cover, a dome made of polycarbonate and security screws. A camera equipped with the Vandalism set is perfectly suited for applications in demanding environments (such as prisons, social hot spots, train stations, etc.).
Q22M Camera Manual Part 1 Notes: © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
Q22M Camera Manual Part 1 1.1 MOBOTIX Q22M cameras come with a standard L11 Fisheye lens that has a horizontal image angle of 180°. If desired, you can order the camera with an L22 Super Wide-Angle lens* (horizontal image angle of 90°). The integrated virtual PTZ features of the camera software or MxControlCenter/MxEasy properly correct the lens distortion that is specific to each of the lenses. Both lenses deliver good image quality even when using maximum digital zoom.
19/112 Q22M Camera Manual Part 1 Lens Table Part Name L11 L22* 35 mm equivalent 11 mm 22 mm Actual focal length 1,8 mm 4 mm Aperture 2.0 2.0 Image angle horizontally 180° 90° Image angle vertically 160° 67° Distance 1 m (3 ft) m m • Image width infinite 2.0 • Image height 11 1.3 Distance 5 m (3 ft) m m • Image width infinite 10.0 • Image height 55 6.6 Distance 10 m (3 ft) m m • Image width infinite 20.0 • Image height 110 13.
Q22Mi-Basic D22 MX-Q22Mi-Basic-D22 Q22M-Secure D11 MX-Q22M-Sec-D11 Q22M-Secure D22 MX-Q22M-Sec-D22 Q22M Camera Manual Part 1 Q22Mi-Basic D11 MX-Q22Mi-Basic-D11 20/112 IP54 IP54 IP65 IP65 E /- / - /- E /- / - /- E /- / U*/- E /- / U*/- - - 1 1 Integrated microphone/speaker -/X -/X X/X X/X Mono (M) / Dual (D) M M M M Color Color Color Color L11 L22 L11 L22 VGA VGA 3 Mega 3 Mega 640x480 640x480 2048x1536 2048x1536 16/16/- 16/16/- 30/30/12 30/30/12 1 1 1 1 Sen
21/112 Basic Models Web Models IT Models Secure Models Q22M Camera Manual Part 1 Digital zoom (up to 8x, continuous) with panning X*** X X X Motion JPEG/MxPEG video streaming X/X X/X X/X X/X Custom exposure windows X X X X Video Motion detection X X X X Time and event control (FTP, e-mail, logos) X X X X X X X M12 M12 D12 D12 D22M M22M D22M Q22M Software Features (All Models) Weekly schedules/holidays Web functionality (FTP, e-mail) X X X X Quad/MultiView in browser
22/112 Q22M Camera Manual Part 1 1.2 The MOBOTIX Concept In addition to the features specific to the MOBOTIX Q22M, this section contains an overview of the MOBOTIX concept, which brings many more advantages over other systems. High-Resolution Live Video With up to 30 Frames/s The MOBOTIX cameras deliver smooth live video with lip-synchronous live audio, yet they keep the network load to a minimum.
Q22M Camera Manual Part 1 23/112 Storage on SD Cards MOBOTIX cameras support the direct storage on an internal SD card (max. 16 GB). By using this integrated SD card DVR, the camera has these additional applications: • Stand-alone use of the camera without file server thanks to recording on the SD card. • High-security application with recording on a file server or NAS/SAN in which the SD card serves as storage buffer.
24/112 Q22M Camera Manual Part 1 Weatherproof *In conjunction with Wall Mount; Q22M-Basic reaches IP54 The MOBOTIX Q22M-Secure has been certified according to IP65 and is designed for outdoor as well as indoor usage*. Since the camera does not have any moving parts, the Q22M is extremely robust, durable and resistant against heat or cold (-30 to +60°C; -20 to +140°F).
Q22M Camera Manual Part 1 25/112 MxEasy – Intuitive Application for Windows, Macintosh and Linux The new MOBOTIX MxEasy (currently in development) aims at easily operating the important camera functions thanks to its intuitive user interface, thus creating a new user experience when viewing and controlling MOBOTIX cameras. The clear design allows managing up to 16 cameras and the application can show up to four cameras at the same time.
26/112 Q22M Camera Manual Part 1 More Features • True software scaling for easily generating smaller image formats for PDAs (such as 320x240, 160x120, etc.). • Audio video recording with three different recording modes: Event recording with audio, continuous recording with variable frame rate and audio as well as event-controlled snapshot recording of JPEG images.
Q22M Camera Manual Part 1 • DynDNS client for accessing the camera via the Web using a symbolic name (e.g. mymobotixcam.dyndns.org) although the provider is assigning a new dynamic IP address every time the camera connects to the Internet. • Unerasable backup operating system that is used to restart the camera in the event that a software update has failed, allowing you to restart the update process.
28/112 Q22M Camera Manual Part 1 2 MOUNTING 2.1 Preparing the Installation Before mounting the MOBOTIX Q22M, the following questions should be answered: 1) Where will the camera be mounted? Mounting the camera to a ceiling or wall, see section 2.1.1 2) Which other mounting options are available? On-wall mounting, in-ceiling mounting, vandalism protection, wall mounting, pole mounting, see section 2.1.2.
Q22M Camera Manual Part 1 29/112 Note When mounting the camera to a ceiling or the Wall Mount, the camera behaves like a ceiling camera (the center of the image is pointing downwards). When mounting the camera to a wall, it behaves like a wall camera (the center of the image is pointing horizontally). 2.1.2 Mounting Options On-wall mounting (D22M-OPT-AP) The On-Wall set can reliably protect external cables if the cables cannot be guided from below the housing but have to be led above the wall.
30/112 Q22M Camera Manual Part 1 Pole Mount (D22M-OPT-MH) Pole Mount: Outdoor quality made of 3 mm stainless steel (in conjunction with Outdoor Wall Mount) If you would like to mount the MOBOTIX Q22M to a pole, you should consider using the MOBOTIX Pole Mount. This mount can only be used in conjunction with the wall mount. The supplied stainless steel straps allow attaching the mount to poles with diameters between 60 and 180 mm (2.4 to 7.1 in). 2.1.
31/112 Q22M Camera Manual Part 1 Non-Square Rooms When viewing a 360° (full) image in the browser, you will notice that the Optimum orientation top and bottom of the image is not fully visible, i.e. some image information has been clipped. This is not a fault of the camera, but an intended behavior that aims at achieving the best possible utilization of the image sensor by the camera software.
32/112 Q22M Camera Manual Part 1 2.1.4 Network Connection and Power Supply, UPS Power-over-Ethernet (MxPoE) Power is supplied to all Q22M models via the network cabling (MxPoE, Powerover-Ethernet). For smaller installations, the universal power supply (MX-SNT-E/U/ GB/J/AUS01-30-RJ) with the MOBOTIX Network Power Adapter MX-NPA-3-RJ is sufficient.
Q22M Camera Manual Part 1 33/112 Power-over-Ethernet (PoE according to IEEE 802.3af) Besides MOBOTIX MxPoE, the MOBOTIX Q22M also supports the Power-overEthernet standard IEEE 802.3af. You can hence use switches or routers that support the PoE (Power-over-Ethernet) standard IEEE 802.3af. Note If you are using Power-over-Ethernet (IEEE 802.3af) network components for supplying power to the MOBOTIX Q22M, make sure that these components do not have a fan.
34/112 Q22M Camera Manual Part 1 2.1.5 Providing the Camera Connections, Wall Outlets Once the camera position, the position of the cable outlets and the method of power supply have been decided upon, the cabling can be installed. Before mounting the MOBOTIX Q22M, you should make sure that the network connections have been properly tested, so that the proper functioning of the camera is guaranteed. Please read section 2.11.
Q22M Camera Manual Part 1 35/112 2.1.6 Directions for Mounting Once the type of installation, the camera connections, the power supply and the mounting options have been decided upon, you should follow the directions listed below. This ensures that you only have to read the relevant sections of this chapter, which will speed up installing the Q22M. Directions for Mounting Preparatory Tasks Sections Q22M Sections Type of Installation Sections Mounting to a Ceiling 2.2 2.
36/112 Q22M Camera Manual Part 1 2.2 Q22M: Delivered Parts, Components and Dimensions 2.2.1 Delivered Parts and Camera Components Camera housing (item 1.1) with mounting ring (item 1.1) 4 wood screws 4.5x60 mm (item 1.13) 4 dowels 8 mm (item 1.11) 4 washers Ø 5.3 mm (item 1.12) Lens wrench (item 1.3) Lens (item 1.2) Make sure to check the delivered parts! ∅ 160 mm/6.3 in Outer shell (item 1.9) SD card (item 1.4) 4 Allen screws M4x16 mm (item 1.14) 4 washers Ø 4.3 mm (item 1.
Q22M Camera Manual Part 1 37/112 2.2.2 Camera Housing and Connectors The MOBOTIX Q22M consists of the camera housing (motherboard and lens), the outer shell and the mounting ring. Connection • NET (Ethernet network/power supply) Outer shell Camera housing Lens Connection Loudspeaker Network cable (hidden) Microphone LEDs (1 x green, 1 x red) Slot for SD card © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
38/112 Q22M Camera Manual Part 1 48 mm/1.9 in 2.2.3 Q22M: Dimensions Without Mounting Options Ø 160 mm/6.3 in Mobile Q22M application in a bus: Full image (QXGA, uncorrected) of the rear exit © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
39/112 Q22M Camera Manual Part 1 Drilling Template Mounting Ring 100 mm/3.9 in 100 mm/3.9 in 5.5 mm/0.22 in in 5.6 / mm .4 1 4 1 Note Find the folded drilling template at the end of the manual. Make sure that the drilling template is not scaled or adjusted to the paper size when printing the PDF file. © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
40/112 Q22M Camera Manual Part 1 2.3 Camera Accessories: Delivered Parts, Components and Dimensions 2.3.1 On-Wall Set Housing (item 2.1) The MOBOTIX camera is not included in the delivery of the On-Wall set! 4 Allen screws M4x35 mm (item 2.2) 4 washers Ø 4.3 mm (item 2.3) Count 1 4 4 Part Name On-Wall set housing Stainless steel Allen screws M4x35 mm Stainless steel washers Ø 4.3 mm 85 mm/3.3 in Dimensions On-Wall set On-Wall set 10° ∅ 165 mm 74 mm/2.
41/112 Q22M Camera Manual Part 1 Drilling Template On-Wall Set 60 mm/2.4 in 100 mm/3.9 in ø5.8 mm/2.3 in Note Find the folded drilling template at the end of the manual. Make sure that the drilling template is not scaled or adjusted to the paper size when printing the PDF file. © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
42/112 Q22M Camera Manual Part 1 2.3.2 In-Ceiling Set In-Ceiling mount (item 3.1) 5 clamps (item 3.4) The MOBOTIX camera is not included in the delivery of the In-Ceiling set! ∅ 150 mm/5.9 in diameter 5 winged cams (item 3.3) Wrench for In-Ceiling mount (item 3.5) Decoration ring (item 3.2) Dimensions Count 1 1 5 5 2 Part Name In-Ceiling set Decoration ring Winged cam Clamps Wrench for In-Ceiling mount Min: 6 mm/0.2 in Max: 22 mm/0.9 ∅ 165 mm 24 mm/0.
Q22M Camera Manual Part 1 43/112 Cutting Template In-Ceiling Set ∅ ter me a i nd 9i . 5 / mm 0 15 Note Find the folded drilling template at the end of the manual. Make sure that the drilling template is not scaled or adjusted to the paper size when printing the PDF file. © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
44/112 Q22M Camera Manual Part 1 2.3.3 Vandalism Set 4 security screws (item 4.3) Stainless steel cover (item 4.1) ∅ 160mm/6.3 in Dome (item 4.5) The MOBOTIX camera is not included in the delivery of the Vandalism set! 4 spacers (item 4.2) Two-hole driver bit (item 4.4) Count 1 4 4 1 1 1 Part Name Stainless steel cover 2 mm stainless steel Spacers for Vandalism set Security screws M4x16 mm Two-hole driver bit for security screws Polycarbonate dome Dome wrench Dimensions ∅ 165 mm 53 mm/2.
45/112 Q22M Camera Manual Part 1 Variants The Q22M Vandalism set provides added protection for Q22M cameras. The set consists of a robust stainless steel cover, a dome made of polycarbonate and security screws. A camera equipped with the Vandalism set is perfectly suited for applications in demanding environments (such as prisons, social hot spots, train stations, etc.).
46/112 Q22M Camera Manual Part 1 2.3.4 Wall Mount Bottom plate (item 5.8) 4 wood screws 6x50 mm (item 5.4) 8 Allen screws M4x16 mm (item 5.6) Wall mount (item 5.1) 4 washers Ø 6.4 mm (item 5.3) 4 dowels 8 mm (item 5.2) 8 washers Ø 4.3 mm (item 5.7) Wall sealing (item 5.5) The Wall Mount can be used for all Q22M and D22M models Count 1 4 4 4 1 8 8 1 Part Name Wall Mount Dowels 8 mm Stainless steel washers Ø 6.
47/112 Q22M Camera Manual Part 1 15 mm/ 0.59 in 75 mm/2.95 in Drilling Template Wall Mount 160 mm/6.3 in Note Find the folded drilling template at the end of the manual. Make sure that the drilling template is not scaled or adjusted to the paper size when printing the PDF file. © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
48/112 Q22M Camera Manual Part 1 2.3.5 Pole Mount The Pole Mount can only be used in conjunction with the Wall Mount 4 Allen screws M8x30 mm (item 6.2) Pole mount (item 6.1) 2 steel straps (item 6.5) 4 washers Ø 9 mm (item 6.3) 4 lock nuts M8 mm (item 6.
Q22M Camera Manual Part 1 Notes: © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
50/112 Q22M Camera Manual Part 1 2.4 Mounting the Camera Without Additional Mounting Options 1) Prepare the network connection: The network cabling is supplied from directly behind the camera in the center of the housing. The cabling is perfectly protected and cannot be seen or damaged. Note Use a flush-mounted (empty) wall outlet for the network cabling. The camera itself cannot be mounted directly on top of protruding wall outlets.
Q22M Camera Manual Part 1 Caution Only use the factory pre-installed network cable of the MOBOTIX camera. It is very important that the rubber plug of the network cable reliably protects the back of the housing from moisture entering the camera. All openings at the back of the camera housing except the pressure equalization element need to be sealed off properly. This will ensure that the camera remains weatherproof.
52/112 Q22M Camera Manual Part 1 2.5 Mounting With the On-Wall Set 1) Prepare the network connection: You can use any one of the four openings in the On-Wall set to guide the cabling into the camera. When using the OnWall set, you cannot mount it directly on top of a protruding wall outlet. Find the folded drilling template of the On-Wall set at the end of the manual! 2) Drill the holes: Drill the holes for the supplied dowels.
Q22M Camera Manual Part 1 53/112 7) Remove the mounting ring: Disengage the mounting ring from the housing of the camera. This ring is not required when mounting the camera to the On-Wall set. 8) Connect the cable: Connect the network cable to the network cable of the camera using a patch cable connector. Cable that is too long can be stored easily within the On-Wall mount. 9) Attach the camera to the mount: Now press the camera into the guides of the OnWall mount.
54/112 Q22M Camera Manual Part 1 2.6 Mounting to a Ceiling Using the In-Ceiling Set 1) Prepare the network connection: Prepare the network connection by guiding the network cable above the ceiling. Make sure that you still have enough free cable available. Find the cutting template at the end of the manual 2) Prepare the camera hole: Cut the hole for the camera.
55/112 Q22M Camera Manual Part 1 7) Insert the camera and the In-Ceiling set into the hole: Make sure that all winged cams are retracted and push the In-Ceiling set with the camera into the hole. Make sure that the OBEN / TOP arrow points into the desired direction. Tightening the screws of the In-Ceiling set extends the winged cams, thus firmly holding the set in place.
56/112 Q22M Camera Manual Part 1 2.7 Mounting the Vandalism Set In order to install the Vandalism set, replace the regular outer shell and the Allen screws by the stainless steel cover, the security screws and the four spacers of the Vandalism set. 1) Remove the outer shell: Remove all four Allen screws using the supplied Allen wrench. Take off the outer shell. 2) Remove the lens gasket: Remove the lens using the lens wrench and remove the lens gasket.
Q22M Camera Manual Part 1 57/112 6) Mount the spacers: Now press the four spacers onto the mounting ring. 4x 7) Mount the stainless steel cover: Place the stainless steel cover onto the camera as shown and use the supplied two-hole driver bit to firmly tighten the security screws. Spacers for Vandalism Set Maximum torque for all screws is 1 to 1.2 Nm (0.74 lbf ft) Security screw and twohole driver bit Mounting the Vandalism set has been completed successfully.
58/112 Q22M Camera Manual Part 1 2.8 Mounting to a Wall Using the Wall Mount 1) Prepare the network connection: The network cabling is supplied through the opening in the back of the wall mount. The cabling is perfectly protected and cannot be seen or damaged. The Wall Mount can be mounted directly on top of wall outlets (flush-mounted or above-the-wall types; maximum dimensions of the outlet 88 x 80 mm (3.5 x 3.2 in) width x height).
Q22M Camera Manual Part 1 59/112 6) Connect the cable: Connect the network cable to the network cable of the camera using a patch cable connector. Cable that is too long can be stored easily within the Wall Mount. 7) Attach the camera to the mount: Now press the camera into the guides of the Wall Mount. The tapered guides on the back of the camera housing fit exactly into the openings of the Wall Mount. Make sure that the OBEN / TOP arrow points into the desired direction. Continue with section 2.
60/112 Q22M Camera Manual Part 1 2.9 Finishing the Mounting Process 1) Establish a connection to the camera, check the image: Establish a connection to the camera as described in section 3.3, The First Camera Image and the Most Important Settings. Make sure that you see the live image of the camera on the monitor of your computer or laptop. Check the image on a computer monitor. Maximum torque for all screws is 1 to 1.2 Nm (0.
Q22M Camera Manual Part 1 2.10 Operating the MOBOTIX Q22M-Secure With SD Card If you would like to remove, insert or exchange the SD card, you need to dismantle the camera. In order to avoid loss of data, you need to make sure that you deactivate SD card recording and reboot the MOBOTIX camera before removing the card. Caution An SD card may only be removed from the camera after you have deactivated Recording to SD Card and rebooted the camera. Failing to do so may lead to loss of data! 2.10.
62/112 Only remove the SD card from the camera after you have deactivated SD Card Recording and rebooted the camera! Q22M Camera Manual Part 1 4) Remove the SD card: Gently push the SD card into the card slot. The card is released from the slot and can be removed from the camera. Open Admin Menu > Storage on External File Server / Flash Device to deactivate the recording on an SD card If you would like to use the camera without SD card, continue with step 2 in section 2.10.2, Inserting an SD Card. 2.10.
Q22M Camera Manual Part 1 4) Attach the outer shell: Place the outer shell onto the camera and tighten all four Allen screws using the supplied Allen wrench. 63/112 Maximum torque for all screws is 1 to 1.2 Nm (0.74 lbf ft) 5) Activate recording: If you have inserted an SD card that has already been MxFFS-formatted, you can activate the recording in Admin Menu > Storage on External File Server / Flash Device. Once the camera has been rebooted, it automatically activates recording.
64/112 Q22M Camera Manual Part 1 2.11 Notes 2.11.1 Cleaning Instructions Cleaning the Lens If the lens is dirty from the installation process, clean the lens using a lint-free cotton cloth. Make sure that the lens is still in focus after cleaning and adjust the lens' focus if required. Cleaning the Dome • • • • In order to protect the dome from being scratched and from getting dirty, only handle the dome using a soft cotton cloth or the protective plastic of the camera's shipping box.
Q22M Camera Manual Part 1 • 65/112 Avoiding induction: When running data cables parallel to existing regular power lines or high-voltage wires, make sure you observe the minimum distances to the power cables. Fire Prevention When installing the power lines to the camera, make sure you always adhere to the relevant regulations on wiring and fire prevention at the site of the installation.
66/112 Q22M Camera Manual Part 1 2.12 Camera Accessories Power Supply (MX-SNT-E/U/GB/J/AUS01-30-RJ) Not required if network components are used that support the PoE (Powerover-Ethernet) standard IEEE 802.3af! The MOBOTIX power supply is required if you do not use a Network Power Rack or Network Power Box or a PoE-compatible switch or router. Network Power Adapter (MX-NPA-3-RJ) Power supply for smaller systems The Network Power Adapter allows supplying power to one MOBOTIX camera via the network cable.
Q22M Camera Manual Part 1 67/112 On-Wall Set (MX-D22-OPT-AP) This set can reliably protect external cables if the cables cannot be guided from below the housing but have to be led above the wall. In addition, the On-Wall mount provides ample space for extra modules.
68/112 Q22M Camera Manual Part 1 Wall Mount (MX-D22-OPT-WH) Wall Mount (IP65) This mount is the ideal solution for mounting the Q22M to walls in indoor and outdoor applications. The camera is absolutely dustproof and resistant against water jets (IP65). The Wall Mount also covers RJ45 wall outlets and also has ample space for additional modules. Pole Mount (MX-D22-OPT-MH) Pole mount made of 3 mm stainless steel The Pole Mount can only be used in conjunction with the Wall Mount.
Q22M Camera Manual Part 1 Notes: © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
70/112 MOBOTIX cameras can be displayed and configured not only in the browser. You can also use MxControlCenter and MxEasy for this purpose. Q22M Camera Manual Part 1 3 OPERATING THE CAMERA 3.1 Overview MOBOTIX cameras do not require any extra software. Thus, you can set up and operate the MOBOTIX camera using a JavaScript-enabled browser on all common operating systems (such as Windows, Linux, Macintosh, etc.). As an alternative, you can also use the MOBOTIX applications MxControlCenter and MxEasy.
Q22M Camera Manual Part 1 71/112 3.1.2 Setting up the Network Interface of the Camera and the First Image Every MOBOTIX camera has its individual factory IP address (e.g. 10.1.0.99). Local computer networks usually have IP addresses in the 172 or 192 ranges. In order to access a MOBOTIX camera via the network, the camera needs to get an IP address in the same address range.
72/112 Free download of MxControlCenter and MxEasy: www.mobotix.com Q22M Camera Manual Part 1 Requirement • The MxControlCenter or MxEasy video management software needs to be installed on the computer. MxControlCenter (MxCC) MxEasy c) Automatically using DHCP: The camera can automatically obtain its network parameters using DHCP. Note that this requires a running DHCP server on the network, which can also be a DSL router with activated DHCP server.
73/112 Q22M Camera Manual Part 1 3.1.3 Configuring the MOBOTIX Q22M The 180° lens with 360° allround view and the integrated virtual PTZ features (vPTZ) allows continuously zooming the live image of the MOBOTIX Q22M using the mouse wheel or a joystick. Likewise, you can move the visible image section to any position in the live image. You should, however, start configuring the camera by setting the mounting position of the camera (wall or ceiling) and by setting the North direction for the camera.
74/112 Q22M Camera Manual Part 1 3.2 Connecting the Camera to the Network and to the Power Supply 3.2.1 Notes on Cable Lengths and Power Supply • The power supply of the camera can only be established using the 10BaseT/NET connector of the camera with the (pre-installed) network cable. In order to supply power via the network cabling we recommend the MOBOTIX PoE products (MxPoE, see also section 2.
75/112 Q22M Camera Manual Part 1 3.2.2 Camera Startup Sequence As soon as the camera's power supply has been established, the two LEDs will show the progress of the startup sequence (see section 5.4.3, LED Signals and LED Configuration, in the Software Manual). • • • Booting: Immediately after connecting the power supply, the red LED lights up, blinks for two seconds, then stays on permanently. The camera's boot loader checks the hardware, unpacks and starts the operating system.
76/112 Q22M Camera Manual Part 1 3.2.3 Power Supply (MxPoE) Using a Switch MOBOTIX power supply and Network Power Adapter required MOBOTIX power supply and Network Power Adapter required (1) Connect the factory pre-installed cable of the camera to the Camera connector of the Network Power Adapter. (2) Connect the LAN/Power connector of the NPA to an Ethernet connector of the switch/router or the Ethernet wall outlet.
Q22M Camera Manual Part 1 3.2.5 Power Supply (MxPoE) Using a Network Power Rack or Network Power Box • • Connect the factory pre-installed cable of the camera to the CAM connector of the Network Power Rack (MX-NPR-8/20) or the Network Power Box (MX-NPR-4). Connect the LAN connector of the Network Power Rack to an Ethernet connector of the switch/router.
78/112 Q22M Camera Manual Part 1 3.3 The First Camera Image and the Most Important Settings Once the camera has been connected to the network, you need to set up the camera's network interface accordingly. This step involves setting up and checking the network parameters of the camera. If your network or your computer is already running on a 10.x.x.x network with a 255.0.0.
Q22M Camera Manual Part 1 (4) Enter an IP address in the 10.x.x.x range in this field (e.g. 10.1.0.11). Note that this must not be the IP address of the camera or of another attached network device. (5) Close all dialogs by clicking on OK. The computer now has the IP address 10.1.0.11, allowing it to access the camera with its factory IP address in the 10.x.x.x network (10.1.0.99 in this example). 79/112 Setting up an IP address on Windows computers Caution: Netmask 255.0.0.
80/112 Q22M Camera Manual Part 1 3.3.2 The First Image and the Most Important Settings in the Browser Camera access: http://10.1.0.99 (example IP) The factory IP address is printed on a sticker on the camera housing Now that you have successfully started the camera for the first time, you can access the camera using your preferred browser to see the live video stream and the user interface.
Q22M Camera Manual Part 1 81/112 a) Set the mounting position: A Q22M camera can be installed at the ceiling or at a wall (Installation Quick Control, Wall or Ceiling option). Note that the camera has different features that depend on the chosen setting. b) Set the North direction: If the camera has been mounted to a ceiling, you should set the North direction.
82/112 *Available in a currently developed software version Q22M Camera Manual Part 1 2) Full Image Recording On* Advantages • The currently displayed image section of the live image does not influence the recorded images or video sequences. • The events that triggered video motion windows are always visible in the recorded images or video sequences. Disadvantages • The frame rate of the live stream is slightly reduced.
83/112 Q22M Camera Manual Part 1 Zoomed image section Display Mode Full Image softbuttons switch between these display modes (see section 4.9, Configuring Softbuttons and Managing Functions, in the Software Manual). 2) Define views: If desired, you can save the currently displayed live image as a view (Store View Quick Control) and load it again using the Load View Quick Control. Once you have defined views, the Auto Mode Quick Control (see below) can automatically switch between the saved views.
84/112 Q22M Camera Manual Part 1 3.3.3 The First Image in MxControlCenter Installing MxControlCenter If you have an MxControlCenter installation CD, insert it into your computer drive. Download MxControlCenter free of charge from www.mobotix.com If this is not the case or if you would like to update to a newer version, you can download the latest MSI or ZIP file from the MOBOTIX website. The latest version is available at www.mobotix.com > Support > Software Downloads in the MxControlCenter section.
85/112 Q22M Camera Manual Part 1 Automated Search for MOBOTIX Cameras If you start MxControlCenter for the first time or if you have not yet stored a start layout with the desired video sources (i.e. MOBOTIX cameras), the Open Video Sources dialog will open and automatically starts scanning the network.
86/112 Q22M Camera Manual Part 1 Anytime you connect a new camera to the local network, you can initiate the search in the Open Video Sources dialog again by pushing the button. If the desired MOBOTIX cameras are highlighted as OK in the video source list OK), proceed to the Selecting Video Sources section further below.
Q22M Camera Manual Part 1 Note If you have set a different user name and password for administration than the factory-preset ones (admin, meinsm), you will need to have these user credentials available and enter them in the appropriate dialog. To open the dialog, click on the Enter password context menu entry. Defining Additional Video Sources Besides automatically detecting MOBOTIX cameras, you can also manually add other video sources to the list of available video sources in MxControlCenter.
88/112 Q22M Camera Manual Part 1 Editing the Video Source List This list provides a context menu (right mouse button), allowing you to select/deselect all video sources at once. Similarly, you can highlight some or all of the listed video sources and remove them from the list if they are not to be displayed or managed in MxControlCenter.
Q22M Camera Manual Part 1 89/112 3.3.4 The First Image in MxEasy Installing MxEasy If you have an MxEasy installation CD, insert it into your computer drive. The wizard will guide you through the installation process. If this is not the case or if you would like to update to a newer version, you can download the latest MxEasy version for your operating system from the MOBOTIX website. MxEasy will be available from Q4/2008 at www.mobotix.com > Support > Software Downloads in the MxEasy section.
90/112 Q22M Camera Manual Part 1 Automatic search for cameras when a camera with a factory IP address is connected to a network in which a DHCP server automatically assigns the IP addresses. MxEasy can automatically configure such a camera so that it is "integrated" into your existing network. To do so, simply highlight the desired camera in the list. Click on Next to display a security prompt; if you click on OK, the dialog for reconfiguring the selected camera will appear.
Q22M Camera Manual Part 1 91/112 Selecting Cameras Highlight the desired cameras you would like to manage and display in MxEasy. If you select OK one camera with an status, MxEasy automatically displays the live image of that camera in the preview window. If you are using [Ctrl]-click to select more than one camera, the image from the camera selected last is shown in the preview window.
92/112 Q22M Camera Manual Part 1 3.3.5 Starting the Camera With an Automatic IP Address (DHCP) If your network has a DHCP server, you can start the camera with DHCP support. In this case, the DHCP server automatically assigns an IP address. Activate the camera speaker! Once startup has been completed, the camera automatically announces its IP address, its network mask and its MAC address. Note that this announcement function can be deactivated (Admin Menu > Loudspeaker and Microphone).
93/112 Q22M Camera Manual Part 1 3.3.6 Starting the Camera Using the Factory IP Address In certain situations, it may become necessary to start the camera with its factory IP address. This could be the case, for example, if the IP address has been lost or the camera does not react to the last known IP address.
94/112 Q22M Camera Manual Part 1 3.4 Configuring the Camera in the Browser 3.4.1 Overview You can set up and operate the MOBOTIX camera using a JavaScript-enabled browser on all common operating systems (such as Windows, Linux, Macintosh, etc.). The camera provides an HTML-based user interface for this purpose. The camera executes the changes you make to the camera configuration via HTTP commands using programs and scripts of the embedded software. The settings are stored in the camera's flash memory.
Q22M Camera Manual Part 1 • Optimize the image settings: The factory image settings of MOBOTIX cameras deliver excellent images for most application scenarios and should not be changed. If you do wish to make changes, your changes should be minor and gradual. You should, however, set an image program according to the application scenario of the camera.
96/112 Q22M Camera Manual Part 1 3.4.3 Additional Configuration Options • • Admin Menu: This menu contains the basic configuration dialogs of the camera (e.g. passwords, interfaces, software update). Admin Menu User: admin Password: meinsm • Setup Menu: This menu contains the dialogs for configuring the image, event and recording parameters. Some of these settings can be changed using the corresponding Quick Controls in the Live screen.
Q22M Camera Manual Part 1 Notes: © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
98/112 Q22M Camera Manual Part 1 3.5 SD Card Recording 3.5.1 Introduction Flash-based storage devices (SD cards, CF cards, USB sticks and solid-state disks) do not contain any moving parts as compared to the commonly used hard disks. Flash-based devices are compact, largely resistant to humidity and shock, use very little energy, do not loose data on power failures and get less expensive all the time. They are thus ideally suited for the MOBOTIX cameras.
99/112 Q22M Camera Manual Part 1 Storage Requirements and Life Expectancy of SD Cards The life expectancy of an SD card increases proportionally to the storage capacity, since the camera software will execute fewer write/delete cycles on each storage cell. The first delete operation will start once the SD card has been filled to capacity (first full cycle).
100/112 Q22M Camera Manual Part 1 Monitoring the Cell Wear of Flash Storage Devices (Patent Pending) MOBOTIX uses its own technology for this purpose and has a pending patent. Open Admin Menu > Camera Status to see the Flash Cell Wear parameter. The camera can also display this information in the status bar at the bottom of the live image. In addition, the camera can send a warning message (e.g.
Q22M Camera Manual Part 1 101/112 3.5.2 Formatting an SD Card With the MxFFS Format Before a MOBOTIX camera can store image and video sequences on an SD card, it needs to be formatted as MxFFS (SD cards delivered with MOBOTIX cameras are already MxFFS-formatted).
102/112 Q22M Camera Manual Part 1 3.5.3 Activating the Recording on an SD Card Follow these steps to activate the recording to an SD card that has already been MxFFS-formatted (Admin Menu > Storage on External File Server / Flash Device): 1) Make sure that an SD card is in the SD card slot of the MOBOTIX camera (see section 2.10.2, Inserting an SD Card). 2) Make sure that the SD card has been MxFFS-formatted (see section 3.5.2, Formatting an SD Card With the MxFFS Format).
Q22M Camera Manual Part 1 • In the web browser: Play back the recorded video sequences directly from the SD card using the Playback screen of the camera. To do so, insert the SD card into any SD card-enabled MOBOTIX camera. • In MxEasy: Play back the recorded video sequences from the SD card via the MOBOTIX camera. • In MxControlCenter: • Play back the recorded video sequences from the SD card via the MOBOTIX camera.
104/112 Q22M Camera Manual Part 1 If the SD card's contents are encrypted, you need to enter the corresponding password in the "new" camera in the Admin Menu > Storage on External File Server / Flash Device dialog. Otherwise, the camera cannot access the SD card. 3.5.6 Deactivating SD Card Recording and Removing the Card Follow these steps to deactivate the recording to an SD card (Admin Menu > Storage on External File Server / Flash Device): 1) 2) 3) 4) Activate the None option.
Q22M Camera Manual Part 1 3.5.8 Problems Accessing an SD Card Caution Some SD cards cannot be set back reliably by the MOBOTIX camera when rebooting. In rare occasions, the camera cannot access such an SD card after the camera has executed a soft reboot. If this should be the case, you need to execute a camera hard reboot (disconnect the camera from the power supply, then reconnect it, e.g. by disconnecting, then reconnecting the network cable at a PoE switch).
106/112 Q22M Camera Manual Part 1 3.6 Important Notes 3.6.1 Weatherproofness The MOBOTIX Q22M Secure models reach protection class IP65 (absolutely dustproof, resistant against water jets) and are an excellent choice for outdoor applications when used with the wall mount. The Basic model of the MOBOTIX Q22M reaches protection class IP54. 3.6.2 Password for the Administration Menu Accessing the administration area of the camera (Admin Menu button) is only possible after entering a user name and password.
Q22M Camera Manual Part 1 107/112 3.6.4 Starting the Camera Using the Factory IP Address If the camera's IP address is not known, you can start the camera with its factory IP address. Section 3.3.6, Starting the Camera Using the Factory IP Address, describes this procedure in more detail. 3.6.5 Resetting the Camera to Factory Defaults All settings of the MOBOTIX camera can be reset permanently to the factory default settings.
108/112 Q22M Camera Manual Part 1 3.6.8 Deactivating the Automatic Daily Reboot of the Camera Deactivating the camera reboot Per factory default, the MOBOTIX camera automatically reboots every morning at 3:36 am. The reason for this is that external influences (e.g. radiation in high locations) can lead to camera malfunctions. The automatic reboot will refresh the camera's memory and will ensure proper operation without requiring any interaction on the part of the user.
Q22M Camera Manual Part 1 109/112 3.6.13 Additional Information For more information on this topic, see the News and Functional Overview pages in the online help of the camera's browser interface. Click on the yellow [Objekt] icon in the top right corner to open the camera's online help. To get complete information on the camera status and its current configuration, open the Camera Status dialog. Click on the yellow [Objekt] icon in the top right corner to open the corresponding camera dialog.
110/112 Q22M Camera Manual Part 1 Declaration of Conformity © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
Q22M Camera Manual Part 1 Notes: © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
112/112 Q22M Camera Manual Part 1 Notes: © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
Q22M-IT/SECURE: Drilling Template Scale 1:1 1 00 mm/3.94 in 1 00 mm/3.94 in ø5.5 mm/ 0.22 in . 41 1 ø 7i 5 . 5 m/ m 4 n © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
Q22M On-Wall Set: Drilling Template Scale 1:1 60 mm/2.36 in 1 00 mm/3.94 in ø5.8 mm/0.23 in © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
Q22M In-Ceiling Set: Cutting Template Scale 1:1 in 9 . 5 m/ m 0 ø1 5 © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
71 .5 mm/2.82 in Q22M Outdoor Wall Mount: Drilling Template Scale 1:1 50 mm/1 .97 in 3 mm/0.1 2 in ø7.5 mm/0.3 in 1 20 mm/4.72 in 86 mm/ 3.39 in 86 mm/3.39 in ø7.5 mm/0.3 in © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.
MOBOTIX – The HiRes Video Company To demonstrate our confidence in the quality of our products, MOBOTIX cameras were used to capture all the images that appear in this manual. Manufacturer Executive Board MOBOTIX AG Dr. Ralf Hinkel Kaiserstrasse D-67722 Langmeil Registration Office: Kaiserslautern Local Court Germany Registration Number: HRB 3724 Tel : +49 6302 9816-103 Tax Code: 44/676/0700/4 Fax: +49 6302 9816-190 Tax Office: Worms-Kirchheimbolanden, Germany http://www.mobotix.
Q2 2M The HiRes Video Company I th wi X MOBOTIX .com EN Q22M Camera Manual Part 1 nt mou iling e n-C Allround Easy. Allround Secure. MOBOTIX' ultra-compact, weatherproof IP Dome camera is so inconspicuous that many do not recognize it to be a camera. Thanks to its 360° allround view, the camera can monitor and record, event-driven, an entire room.
