User manual

6) Establish a connection to the camera, check the image: Establish a con-
nection to the camera as described in section 3.3,
The First Camera Image
and the Most Important Settings
. Make sure that you see the live image of
the camera on the monitor of your computer or laptop. Check the image on
a computer monitor.
Continue with section 2.9,
Finishing the Mounting Process .
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
51/112
Q22M Camera Manual Part 1
Caution
Only use the factory pre-installed network cable of the MOBOTIX
camera. It is very important that the rubber plug of the network
cable reliably protects the back of the housing from moisture en-
tering the camera. All openings at the back of the camera housing
except the pressure equalization element need to be sealed off
properly. This will ensure that the camera remains weatherproof.