User manual

7) Remove the mounting ring: Disengage the
mounting ring from the housing of the cam-
era. This ring is not required when mounting
the camera to the On-Wall set.
8) Connect the cable: Connect the network ca-
ble to the network cable of the camera using
a patch cable connector. Cable that is too
long can be stored easily within the On-Wall
mount.
9) Attach the camera to the mount: Now
press the camera into the guides of the On-
Wall mount. The tapered guides on the back
of the camera housing fit exactly into the
openings of the On-Wall mount. Make sure
that the OBEN/ TOP arrow points into the
desired direction.
Continue with section 2.9,
Finishing the Mounting Process .
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
53/112
Q22M Camera Manual Part 1
Maximum torque for all
screws is 1 to 1.2Nm
(0.74lbf ft)