User manual

7) Insert the camera and the In-Ceiling set into the hole: Make sure that all
winged cams are retracted and push the In-Ceiling set with the camera into
the hole. Make sure that the OBEN/ TOP arrow points into the desired direc-
tion. Tightening the screws of the In-Ceiling set extends the winged cams,
thus firmly holding the set in place.
8) Mount the decoration ring: Use the two
wrenches for the In-Ceiling mount, place
the ring on the set as shown in the figure
and turn the ring clockwise until it stops.
Dismounting
1) Use the two wrenches for the In-Ceiling
mount included in the delivery to dismount
the decoration ring. Insert the wrenches as
shown and turn the ring counter-clockwise.
2) Loosen the screws of the In-Ceiling set (this will automatically retract the
winged cams). You can now remove the In-Ceiling set with the attached
camera from the ceiling.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
55/112
Q22M Camera Manual Part 1
The winged cams auto-
matically secure the In-
Ceiling Set in the ceiling
when tightening the
screws (see detail pic-
tures)
Maximum torque for all
screws is 1 to 1.2Nm
(0.74lbf ft)
Mounting with the In-Ceil-
ing wrenches
Unmounting with the In-
Ceiling wrenches
Winged cam