User manual

6) Mount the spacers: Now
press the four spacers onto
the mounting ring.
7) Mount the stainless steel cover: Place the
stainless steel cover onto the camera as
shown and use the supplied two-hole driver
bit to firmly tighten the security screws.
Mounting the Vandalism set has been completed
successfully.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
57/112
Q22M Camera Manual Part 1
Spacers for Vandalism
Set
Maximum torque for all
screws is 1 to 1.2Nm
(0.74lbf ft)
Security screw and two-
hole driver bit
4x