User manual

6) Connect the cable: Connect the network ca-
ble to the network cable of the camera using
a patch cable connector. Cable that is too
long can be stored easily within the Wall
Mount.
7) Attach the camera to the mount: Now press
the camera into the guides of the Wall Mount.
The tapered guides on the back of the cam-
era housing fit exactly into the openings of the
Wall Mount. Make sure that the OBEN/ TOP
arrow points into the desired direction.
Continue with section 2.9,
Finishing the Mounting Process .
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
59/112
Q22M Camera Manual Part 1
Maximum torque for all
screws is 1 to 1.2Nm
(0.74lbf ft)