User manual

2.9 Finishing the Mounting Process
1) Establish a connection to the camera, check the image: Establish a con-
nection to the camera as described in section 3.3,
The First Camera Image
and the Most Important Settings
. Make sure that you see the live image of
the camera on the monitor of your computer or laptop. Check the image on
a computer monitor.
2) Attach the outer shell: Place the outer shell
onto the camera and tighten all four Allen
screws using the supplied Allen wrench.
3) Clean the lens: If required, clean the lens gently using a lint-free cotton cloth.
Do not apply excessive pressure onto the glass surface when cleaning the
lens.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
60/112
Q22M Camera Manual Part 1
Maximum torque for all
screws is 1 to 1.2Nm
(0.74lbf ft)