User manual

4) Remove the SD card: Gently push the SD

card into the card slot. The card is released

from the slot and can be removed from the

camera.

If you would like to use the camera without SD card, continue with step2 in sec-

tion2.10.2,

Inserting an SD Card

2.10.2 Inserting an SD Card

If the camera already contains an SD card, execute steps2 and 3 in section2.10.1,

Removing an SD Card

, first.

1) Insert the SD card: Insert the SD card as

shown until you feel the card lock in place.

The card is now fully inserted in the card slot.

2) Mount the back plate: Place the back plate

on the housing and make sure that the holes

for the screws align with the thread inserts

and that the network cable runs along the ar-

row as shown in the figure.

3) Tighten the back plate: Place the four Allen

screws back into the back plate and tighten

the screws using the supplied 2mm Allen

wrench.

www.mobotix.com • sales@mobotix.com

62/112

Q22M Camera Manual Part 1

Only remove the SD card

from the camera after

you have deactivated SD

Card Recording and re-

booted the camera!

Open Admin Menu> Sto-

rage on External File

Server/ Flash Device to

deactivate the recording

on an SD card