User manual

2.12 Camera Accessories
Power Supply (MX-SNT-E/U/GB/J/AUS01-30-RJ)
The MOBOTIX power supply is required if you do not
use a Network Power Rack or Network Power Box
or a PoE-compatible switch or router.
Network Power Adapter (MX-NPA-3-RJ)
The Network Power Adapter allows supplying power
to one MOBOTIX camera via the network cable. It
thus allows using the network cable for connecting
to the camera and for remotely supplying power (up
to 100m (300ft)). The Network Power Adapter is re-
quired if you are using the universal power supply
and if power is not supplied using a PoE switch/rou-
ter or a MOBOTIX Netpower Box/Rack.
Netpower Box for up to 4 Cameras (MX-NPR-4)
The MX-NPR-4 allows supplying power to up to four
MOBOTIX cameras via the network cable. The NPR-4
thus replaces four separate power supplies and four
Network Power Adapters. The Netpower Box deliv-
ery includes a (detachable) clip at the back, which
simply clicks onto DIN rails.
Netpower Rack for 8/20 Cameras (MX-NPR-8/20)
These devices allow supplying power to up to eight
or twenty MOBOTIX cameras via the network cable,
respectively. The NPRs thus replace 8/20 separate
power supplies and the same number of Network
Power Adapters; they are easily mounted in 19"
racks (2 rack units).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
66/112
Q22M Camera Manual Part 1
Not required if network
components are used that
support the PoE (Power-
over-Ethernet) standard
IEEE 802.3af!
Power supply for smaller
systems
Intelligent and robust po-
wer supply thanks to DIN
rail installation
Zero maintenance and re-
liable as these devices do
not require fans
Advantages of MOBOTIX PoE Products
• Zero maintenance and durable without fans.
• Higher reliability of the system as a whole, since standard swit-
ches without PoE can be used (lower risk of failure).
• Easy installation on DIN rails (
MX-NPR-4 ) or in 19" racks ( MX-NPR-
8/20
).