User manual

(4) Enter an IP address in the 10.x.x.x range in this field (e.g. 10.1.0.11).
Note that this must not be the IP address of the camera or of another
attached network device.
(5) Close all dialogs by
clicking on OK.
The computer now has
the IP address 10.1.0.11,
allowing it to access the
camera with its factory
IP address in the
10.x.x.x network
(10.1.0.99 in this exam-
ple).
• Linux/UNIX/OSX:
(1) Open a terminal as root user.
(2) Enter the following command:
• Linux/UNIX: ifconfig eth0:1 10.1.0.11
• OS X: ifconfig en0:1 10.1.0.11
The computer now has the additional IP address 10.1.0.11, allowing it to
access the camera with its factory IP address in the 10.x.x.x network
(10.1.0.99 in this example).
3) Set up the target network parameters of the camera:
Setting up the network parameters of the MOBOTIX camera for the first time
is most easily accomplished using the Quick Installation wizard.
(1) Open a web browser on a computer.
(2) Enter the factory IP address of the MOBOTIX camera (e.g. 10.1.0.99) in the
browser address bar and hit the Return key on the keyboard. This will
open the user interface of the MOBOTIX camera.
(3) Click on the Admin Menu button on the user interface of the MOBOTIX
camera (see section3.3.2). This will automatically open the Quick Installa-
tion wizard (see also section 5.2,
Quick Installation , in the Software Man-
ual
).
(4) Enter the target network parameters of the camera on the appropriate
page of the Quick Installation wizard.
Once you have completed the Quick Installation wizard and rebooted the
camera, it will use the new network parameters and you can connect the
camera to the target network.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
79/112
Q22M Camera Manual Part 1
Setting up an IP address
on Windows computers
Caution:
Netmask 255.0.0.0
Setting up a second IP ad-
dress on Linux/UNIX and
OSX computers
Admin Menu
User: admin
Password: meinsm