Technical data

140/148
S14 Camera Manual: Operating The Camera
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
3.6 Additional Notes
3.6.1 Do Not Sharply Bend The Connection Cables To The Sensor Modules
In order to ensure proper functioning of the sensor modules, you need to make sure that
the connection cables to the sensor modules are not bent sharply.
3.6.2 Password For The Administration Menu
Accessing the Administration Menu of the camera (Admin Menu softbutton) is only pos-
sible after entering a user name and password.
• Factory default user name is admin.
• Factory default password is meinsm.
The Quick Installation assistant automatically appears when the Administration Menu is
accessed for the first time. It provides an easy method to adjust the basic camera settings
to the current application scenario. For security reasons, we highly recommend chang-
ing the default administrator password after the camera has been properly configured.
Enter the user name and password exactly as shown above. Note that all entries are
case-sensitive.
Caution
Make sure that you store information on user names and passwords in a secure
place. If you lose the administrator password and cannot access the administration
menu, the password can only be reset at the factory. This service is subject to a fee!
3.6.3 Permanently Deactivating The Microphone
Deactivating a camera’s microphone may be necessary in order to protect the privacy of
persons at a workplace or for other reasons. You can permanently and irreversibly deac-
tivate the microphone in the Admin Menu> Loudspeaker and Microphone dialog box.
Caution
This deactivation occurs in the camera module itself and cannot be reversed,
even at the factory. Deactivating the microphone will also deactivate all the functions
making use of the microphone/microphones (S14D’s sensor modules).
3.6.4 Starting The Camera With The Factory IP Address
If the camera’s IP address is not known, you can start the camera with its factory IP
address.
Section 3.2.6, «Starting The Camera With The Factory IP Address» describes this
procedure in more detail.
The microphone can be
irreversibly deactivated!