Technical data

73/148
Determining The Installation Position
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
Wall-Mounting
Mounting a S14D sensor module on a wall, for example, on basic partition walls or fake
walls with cavities behind the wall covering, is just as easy as mounting on a ceiling. Drill
a hole 45mm/1.77in diameter, fit the sensor module, fix from behind with a locknut and
connect to the base module. Depending on the installation height and the required cam-
era focus, the camera can be installed with or without the wedge with 15° tilt available as
an accessory.
MOBOTIX also oers the appropriate installation accessories for mounting the sensor
module on thicker walls. Longer ”tunnel holes” through a wall can also be bridged using
several extension pieces (each approx. 40mm/1.6in). The maximum wall thickness is
therefore only limited by the length of the sensor cable depending on the installation
position of the base module, which is in theory 2m/6.6ft.
Productpreview:
SurroundMount
module with 2 x L11
sensor modules
S14D SurroundMount:
6 megapixel 360°camera
Mounting with or without
15° wedge (accessories)
Diam. 50mm/2in*
Diam. 45mm/1.77in
15mm/
0.6in
* Hole diameters vary
depending on mate-
rial thickness (see
«Size Of The Drilling
Holes With Different
Material Thicknesses»
in
Section 2.3.2,
«Attaching And
Connecting The S14D
Sensor Modules»
SurroundMount