Technical data

77/148
Before Mounting
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
Caution
Only MOBOTIX cables may be used for the Ethernet and USB connection as
well as
to the sensor modules (S14D) to ensure the camera remains permanently
watertight.
Ethernet
for LAN
MiniUSB
Sensor cable
Unused connections must be secured using appropriate cable plugs and by
closing the corresponding locks
to protect the inside of the housing against water
and dust.
Removing MOBOTIX Cables And Plugs
The corresponding lock must first be removed or released to remove one of the cables or
plugs indicated above from the S14:
Patch cable MiniUSB/sensor cable
1. Turn the bayonet catch to the left.
2. Remove the bayonet catch.
3. Remove the cable/plug.
1. Pull the triple retainer upwards
(away from the base plate) until
it clicks into place.
2. Remove the cable/plug.