Technical data

79/148
Before Mounting
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
2.2.3 Network Connection With MOBOTIX Patch Cable
The supplied MOBOTIX patch cable can be used to connect the camera to an MX-Patch-
Box
, an MX-NPA-Box or to a standard network port.
Connecting The Patch Cable To The Camera
First remove the blue bayonet catch and the blue sealing
plug in the left-hand connector on the S14. Then insert the
MOBOTIX patch cable into the camera and secure the cable
using the bayonet catch.
Connecting The Patch Cable To An MX-Patch-Box, MX-NPA-Box or
Standard Network Port
First remove the blue bayonet catch and the blue sealing
plug in the right-hand connector on the box to establish the
network connection to an MX-Patch-Box or MX-NPA-Box.
Then insert the MOBOTIX patch cable into the box and secure
the cable using the bayonet catch.
More information on installing an MX-Patch-Box or MX-NPA-
Box is available at www.mobotix.com under Products>
Accessories> Functional Boxes.
Insert the MOBOTIX patch cable of the S14 into the network port for standard connections
(only permitted in indoor areas).
Connecting Peripheral Devices (MxBus, Microphone, Speaker)
The opening provided for the installation cable must be used
for all other cables that are connected to the camera when
using the MOBOTIX patch cable. Depending on the cable
used, the single wire plug installed must be replaced with
one of the other cable plugs (M.4/5).
The cable used must be fixed to the circuit board using one of the cable ties supplied (M.8)
to ensure that less strain is placed on the cable. The individual cable wires must be fixed
on the screw clamps using the the screwdriver supplied (M.9).
Patch cable
Patch cable
Further cables