Technical data
92/148
S14 Camera Manual: Installation
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
5.
Connecting the cable wires
: The individual wires of the installation cable can be
connected to the LSA cutting clamp using an appropriate tool and in accordance
with the EIA/TIA-568A or B standard used (see printed color coding above the clamp;
see red arrow in the illustration below).
Caution
Make sure that
all cable end ocuts are removed from inside the camera
. If
not, this could lead to
short circuits
!
Hint
: Hold the cable ends firm before cutting them with the LSA+ tool.
If additional cables are required inside the housing (MxBus, microphone, speaker), they
must be connected as described in
Section 2.5.3, «Connecting Additional Cables»
.